TLP240D,TLP240DF Photocouplers Photorelay TLP240D,TLP240DFTLP240D,TLP240DFTLP240D,TLP240DFTLP240D,TLP240DF 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Mechanical relay replacements Security Systems Measuring Instruments Factory Automation (FA) Amusement Equipment Smart Meters Electricity Meters 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP240D and TLP240DF photorelay consist of a photo MOSFET optically coupled to an infrared light emitting diode. They are housed in a 4-pin DIP package. They provide an isolation voltage of 5000 Vrms, making them suitable for applications that require reinforced insulation. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Halogen-free For details, seeDevices in Halogen-Free Resin Package at the end of this datasheet. (2) Normally opened (1-Form-A) (3) OFF-state output terminal voltage: 200 V (min) (4) Trigger LED current: 3 mA (max) (5) ON-state current: 250 mA (max) (6) ON-state resistance: 8 (max) (7) Isolation voltage: 5000 Vrms (min) (8) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN60747-5-5 (Note 1)(Note 1)(Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Option (D4) Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (D4)Option (D4)Option (D4). 4. 4. 4. 4. Mechanical ParametersMechanical ParametersMechanical ParametersMechanical Parameters 7.62-mm Pitch 10.16-mm Pitch Characteristics Unit TLP240D TLP240DF Creepage distances 7.0 (min) 8.0 (min) mm Clearance distances 7.0 (min) 8.0 (min) Internal isolation thickness 0.4 (min) 0.4 (min) Start of commercial production 2013-03 2016-2017 2017-10-13 1 Toshiba Electronic Devices & Storage Corporation Rev.4.0TLP240D,TLP240DF 5. 5. 5. 5. Packaging (Note)Packaging (Note)Packaging (Note)Packaging (Note) TLP240D TLP240D(LF1,TP1) TLP240D(LF5,TP5) 11-5B201S 11-5B205S 11-5B2S TLP240DF TLP240DF(LF4,TP4) 11-5B204S 11-5B202S Note: Through-hole type: TLP240D, TLP240DF Lead forming option: (LF1), (LF4), (LF5) Taping option: (TP1), (TP4), (TP5) 6. 6. 6. 6. Pin AssignmentPin AssignmentPin AssignmentPin Assignment 1: Anode 2: Cathode 3: Drain 4: Drain 7. 7. 7. 7. Internal CircuitInternal CircuitInternal CircuitInternal Circuit 2016-2017 2017-10-13 2 Toshiba Electronic Devices & Storage Corporation Rev.4.0