TLP266J Photocouplers Infrared LED & Photo Triac TLP266JTLP266JTLP266JTLP266J 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Triac Drivers Programmable Logic Controllers (PLCs) AC-Output Modules Solid-State Relays 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP266J consists of a zero crossing photo triac, optically coupled to an infrared LED. The TLP266J is housed in the SO6 package and guarantees a creepage distance of 5.0 mm (min), a clearance of 5.0 mm (min) and insulation thickness of 0.4 mm (min). Therefore, the TLP266J meets the reinforced insulation class requirements of international safety standards. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Peak off-state voltage: 600 V (min) (2) Zero crossing functionary (ZC) (3) Trigger LED current: 10 mA (max) (4) On-state current: 70 mA (max) (5) Isolation voltage: 3750 Vrms (min) (6) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1)(Note 1)(Note 1) CQC-approved: GB4943.1, GB8898 Japan and Thailand Factory Note 1: When a VDE approved type is needed, please designate the Option (V4)Option (V4)Option (V4)Option (V4). Table Table Table Table Trigger LED Current (Note) (Unless otherwise specified, TTrigger LED Current (Note) (Unless otherwise specified, TTrigger LED Current (Note) (Unless otherwise specified, TTrigger LED Current (Note) (Unless otherwise specified, T = 25 = 25 = 25 = 25 )))) aaaa I Rank Trigger LED Current I Trigger LED Current I FT FT FT Rank Test Condition Unit Marking (min) (max) None 10 V = 3 V 10 mA T (IFT7) 7 V = 3 V 7 T Note: Specify both the part number and a rank in this format when ordering. Example: TLP266J (IFT7) For safety standard certification, however, specify the part number alone. Example: TLP266J Start of commercial production 2012-11 2017-2020 2020-02-17 1 Toshiba Electronic Devices & Storage Corporation Rev.8.0TLP266J 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode 3: Cathode 4: Triac Terminal 6: Triac Terminal 11-4M1S 5. 5. 5. 5. Mechanical ParametersMechanical ParametersMechanical ParametersMechanical Parameters Characteristics 2.54-mm pitch Unit Creepage distances 5.0 (min) mm Clearance distances 5.0 (min) Internal isolation thickness 0.4 (min) 6. 6. 6. 6. Product Naming ConventionsProduct Naming ConventionsProduct Naming ConventionsProduct Naming Conventions (1) Type of package used for shipment is denoted by a symbol suffix after a part number. The method of classification is as below. Example) TLP266J(TPL,E Part number: TLP266J Tape type: TPL (Note 1)(Note 1)(Note 1)(Note 1) G /RoHS COMPATIBLE: E (Note 2)(Note 2)(Note 2)(Note 2) Note 1: At the part of tape type, below options are used. TPL, TPR Note 2: Please contact your Toshiba sales representative for details on environmental information such as the product s RoHS compatibility. RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2017-2020 2020-02-17 2 Toshiba Electronic Devices & Storage Corporation Rev.8.0