TLP361J TOSHIBA Photocoupler IRED & Photo-Triac TLP361J Triac Drivers Unit: mm Programmable Controllers AC-Output Modules, Solid State Relays TOSHIBA TLP361J consists of a zero-voltage-crossing turn-on photo- triac optically coupled to an infrared emitting diode in a four-lead plastic DIP package. Peak off-state voltage: 600 V (min) Trigger LED current: 10 mA (max) On-state current: 100 mA (max) Isolation voltage: 5000 Vrms (min) JEDEC Zero crossing Function TOSHIBA 11-5B2S UL-recognized: UL 1577, File No.E67349 Weight: 0.26 g (typ.) cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 CQC-approved: GB4943.1,GB8898 Japan Factory VDE-approved: EN 60747-5-5 , EN 62368-1 (Note 1) Note 1 : When a VDE approved type is needed, please designate the Option(D4). Maximum operating insulation voltage : 890 Vpk Maximum permissible overvoltage : 8000 Vpk Construction mechanical rating Pin Configuration (top view) 7.62 mm pitch 10.16 mm pitch TLPXXX type TLPXXXF type 4 Creepage distance 7.0 mm (min) 8.0 mm (min) 1 Clearance 7.0 mm (min) 8.0 mm (min) Insulation thickness 0.4 mm (min) 0.4 mm (min) ZC 2 3 Trigger LED current 1: Anode Trigger LED current (mA) Marking of V =3V, Ta=25C 2: Cathode Classification* T classification Min Max 3: Triac Terminal (IFT7) 7 T7 4: Triac Terminal Standard 10 T7blank *Example: (IFT7) TLP361J(IFT7) (Note) When specifying the application type name for certification testing, be sure to use the standard product type name, e.g. TLP361J(IFT7): TLP361J Start of commercial production 2003-06 2019 1 2019-06-24 Toshiba Electronic Devices & Storage Corporation TLP361J Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 53C) I /C 0.7 mA /C F Peak forward current (100 s pulse, 100 pps) I 1 A FP Reverse voltage V 5 V R Diode power dissipation PD 100 mW P / -1.4 mW/ Diode power dissipation derating (Ta 53) D Junction temperature T 125 C j Off-state output terminal voltage V 600 V DRM Ta = 25C 100 On-state RMS current I mA T(RMS) Ta = 70C 50 On-state current derating (Ta 25C) I /C -1.1 mA /C T Peak on-state current (100 s pulse, 120 pps) I 2 A TP Peak non-repetitive surge current (Pw = 10 ms) I 1.2 A TSM Output power dissipation P 300 mW O Output power dissipation derating (Ta 25C) P / C 3.0 mW / C O C Junction temperature T 115 j Storage temperature range T 55~125 C stg Operating temperature range T 40~100 C opr C Lead soldering temperature (10 s) T 260 sol Isolation voltage (AC, 60 s, R.H. 60 %) (Note 1) BV 5000 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pins 1 and 2 are shorted together and pins 3 and 4 are shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 240 V AC ac Forward current I 15 20 25 mA F Peak on-state current I 1 A TP Operating temperature Topr 25 85 C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-24 Toshiba Electronic Devices & Storage Corporation Detector LED