TLP5214 Toshiba

TLP5214 Photocouplers GaAAs Infrared LED & Photo IC TLP5214 Isolated IGBT/Power MOSFET gate drive AC and brushless DC motor drives Unit: mm Industrial Inverters and Uninterruptible Power Supply (UPS) The TLP5214 is a highly integrated 4.0A output current IGBT gate drive photo- coupler housed in a long creepage and clearance SO16L package. The TLP5214, a smart gate driver photocoupler, includes functions of IGBT desaturation detection, isolated fault status feedback, soft IGBT turn-off, active Miller cramping and under voltage lockout (UVLO). This photocoupler is suitable for driving IGBT and power MOSFET used in inverter applications. The TLP5214 consists two GaAAs infrared light-emitting diodes (LEDs) and two high-gain and high-speed ICs. They realize high current, high-speed output control and output fault status feedback. Peak output current: 4.0 A (max) Guaranteed performance over temperature: 40C to 110C Supply current: 3.5 mA (max) Power supply voltage: 15 V to 30 V TOSHIBA 11-10M1 Threshold input current: I = 6 mA (max) FLH Weight: 0.37 g (typ.) Switching time (tp / tp ) : 150 ns (max) LH HL Common mode transient immunity: 35 kV/ s (min) Isolation voltage: 5000 Vrms (min) Construction mechanical rating UL approved : UL1577, File No.E67349 SO16L c-UL approved :CSA Component Acceptance Service No. 5A, File No.E67349 Height 2.3 mm (max) Creepage Distance 8.0 mm (min) Option (D4) VDE approved : DIN EN60747-5-5(Note) Clearance 8.0 mm (min) Insulation Thickness 0.4 mm (min) EN60065 or EN60950-1, EN62368-1 CQC-approved: GB4943.1, GB8898 Japan Factory Note : When a EN60747-5-5 approved type is needed, please designate Option(D4) Truth Table DESAT FAULT UVLO I F V O (V -V ) CC2 E (14Pin DESAT Terminal Input) (3Pin FAULT Terminal Output) + OFF Not Active ( > V ) Not Active High Low UVLO + Not Active ( > V ) Low ( < V ) High High UVLO DESATth ON + Not Active ( > V ) High ( > V ) Low ( FAULT) Low UVLO DESATth ON - Active ( < V ) Not Active High Low UVLO ON - Active ( < V ) Not Active High Low UVLO OFF Start of commercial production 2014-05 1 2015-12-26 TLP5214 Pin Configuration (top view) 1 : V S 1 16 V V S E 2 : V CC1 3 : FAULT V 2 15 V LED CC1 4 : V S 5 : CATHODE 14 3 DESAT FAULT 6 : ANODE 7 : ANODE V 4 13 V CC2 S 8 : CATHODE 9 : V EE V 5 12 CATHODE EE 10 : V CLAMP 11 : V OUT V 6 11 ANODE OUT 12 : V EE 13 : V CC2 V 10 7 ANODE CLAMP 14 : DESAT 15 : V LED V 9 8 EE CATHODE 16 : V E Internal Circuit VCC2 UVLO ANODE Vout CATHODE DESAT DESAT VEE SHIELD V CLAMP VCLAMP VCC1 VE FAULT Vs VLED Note: A 1-F bypass capacitor must be connected between pins 9 and 13, pins 13 and 16. 2 2015-12-26