Industrial DC/DC-Converter TCL-DC Series, 24 to 60 Watt CB Scheme UL 508 Features Ultra-wide input voltage range Output voltage adjustable Overload and short circuit protection Low ripple and noise I/O isolation 1500 VDC Compact, slim plastic case Reliable snap-on mount on DIN-rail Bracket for wall mount included 3-year product warranty In the TCL range of DIN-rail power supplies are 6 models for DC input voltage avail- able. The wide input ranges of 9.518 VDC resp. 1875 VDC means these models can be operated from all popular DC supply voltage systems. With tightly regulated output voltage these DC/DC converters provide a reliable power source for sensitive loads in industrial process controls, factory automation and other equipment exposed to a critical industrial environment. Further applica- tions for these converters are isolation of a specic lfi oad or refreshing the 24 V bus voltage. Easy installation is provided with snap-on mounting on DIN-rails and detachable screw terminal block. Models Order Code Input Voltage Range Output Voltage Output Current max. TCL 012-124 DC 9.5 18.0 VDC 24 VDC 1.0 A TCL 024-105 DC 5 VDC 5.0 A TCL 024-112 DC 18 75 VDC 12 VDC 2.0 A TCL 024-124 DC 24 VDC 1.0 A TCL 060-112 DC 12 VDC 5.0 A 18 75 VDC TCL 060-124 DC 24 VDC 2.5 A Industrial DC/DC-Converter TCL-DC Series 24 to 60 Watt Input Specifications Input power at no load 1.0 Watt max. Start-up voltage/under voltage shut down TCL 012 model: 8.4 VDC / 7.6 VDC TCL 024 & TCL 060 models: 17.2 VDC / 15.7 VDC Reverse polarity protection by internal fuse Efficiency 86 % typ. Output Specicfi ations Output voltage adj. range 5 VDC model: 5.0 5.25 VDC 12 VDC models: 12.0 15.0 VDC 24 VDC models: 24.0 28.0 VDC Regulation Input variation Vin min. to Vin max. 0.5 % max Load variation 0...100% 0.5 % max Ripple and noise (20 MHz bandwidth) <50 mV pk-pk Electronic short circuit protection current limitation at 110 % typ. (constant current, automatic recovery) Overvoltage protection, trigger point 5 VDC model: <6.5 V 12 VDC models: <24 V 24 VDC models: <42 V General Specicfi ations Temperature ranges Operating 25C to +70C max. Storage (non operating) 25C to +85C Temperature derating 1.5 %/K above +50C Humidity (non condensing) 95 % rel. H max. Temperature coefcfi ient 0.02 %/K Switching frequency 55 180 kHz depending on load (frequency modulation) Isolation voltage (60 sec.) Input/Output 1500 VDC Reliability, calculated MTBF at +25C (according to IEC 61709) >2.5 Mio h Safety standards Information technology equipment IEC 60950-1, EN 60950-1 (output SELV), UL Std. 60950-1 (2nd Edition) +Am1:2011, CAN/CSA-C22.2 No. 60950-1-07 +Am1:2011 Industrial control equipment UL 508 Electronic equipment for power installation EN 50178 Electrical equipment for machines EN 60204 Safety approvals CB test certificate (IEC 60950-1) www.tracopower.com/products/tcl-cb.pdf UL approval www.ul.com -> certifications UL 508C listed, CSA C22.2 No.14 File e210002 CSA certification UL 60950-1, CSA 60950-1-03 www.tracopower.com/products/tcl-csa.pdf GS certification www.tracopower.com/products/tcl060dc gs.pdf Electromagnetic compatibility (EMC), emissions EN 61000-6-3 Conducted RI suppression on input EN 55022 class B Radiated RI suppression EN 55022 class B Electromagnetic compatibility (EMC), immunity EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2 4 kV / 8 kV Radiated RF field immunity EN 61000-4-3 10 V/m Electrical fast transient / burst immunity EN 61000-4-4 Level 3 Surge immunity EN 61000-4-5 Level 3 Immunity to conducted RF disturbances EN 61000-4-6 10 Vrms Environmental compliance Reach www.tracopower.com/products/reach-declaration.pdf RoHS RoHS directive 2011/65/EU Case protection IP 20 (IEC 60529) Enclosure material plastic UL 94V-0 rated Mounting DIN-rails as per EN 50022-35x15/7.5 (snap-on with self-locking spring) bracket for wall/chassis mount included Installation instructions www.tracopower.com/products/tcl-dc-inst.pdf All specicfi ations valid at nominal input voltage, full load and +25 C after warm-up time unless otherwise stated.