TDR 2-1212WI TRACO Power

DC/DC Converter TDR 2WI Series, 2 Watt Compact design in THD Package Ultra wide 4:1 input voltage range Fully regulated outputs Low ripple and noise Temperature range 40C to +85C without derating UL 62368-1 IEC 62368-1 UL 60950-1 IEC 60950-1 I/O isolation 1600 VDC The TDR 2WI series is a family of compact 2 W DC/DC-converters with 4:1 in- Continuous short-circuit protection put voltage ranges and tightly regulated output voltages even under no load Remote On/Off control conditions. The product is available in THD-package. They work with high effi- ciency over the full load range and come with a remote On/Off input. The us- Fully RoHS compliant ability in temperature ranges of up to 85C without power derating, continuous 3-year product warranty short circuit protection and excellent immunity against environmental influ- ences make these converters very reliable. A TDR 2WI converter is the ideal so- lution for space critical high end applications in communication equipment, in- strumentation and industrial electronics. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TDR 2-1211WI 5 VDC 400 mA 79 % TDR 2-1212WI 12 VDC 167 mA 80 % 4.5 - 18 VDC TDR 2-1213WI 15 VDC 134 mA 81 % (12 VDC nom.) TDR 2-1222WI +12 VDC 83 mA 12 VDC 83 mA 81 % TDR 2-1223WI +15 VDC 67 mA 15 VDC 67 mA 81 % TDR 2-2411WI 5 VDC 400 mA 79 % TDR 2-2412WI 12 VDC 167 mA 80 % 9 - 36 VDC TDR 2-2413WI 15 VDC 134 mA 82 % (24 VDC nom.) TDR 2-2422WI +12 VDC 83 mA 12 VDC 83 mA 81 % TDR 2-2423WI +15 VDC 67 mA 15 VDC 67 mA 81 % TDR 2-4811WI 5 VDC 400 mA 78 % 12 VDC 167 mA 81 % TDR 2-4812WI 18 - 75 VDC TDR 2-4813WI 15 VDC 134 mA 82 % (48 VDC nom.) TDR 2-4822WI +12 VDC 83 mA 12 VDC 83 mA 81 % TDR 2-4823WI +15 VDC 67 mA 15 VDC 67 mA 81 % Page 1 / 4 www.tracopower.com November 27, 2020TDR 2WI Series, 2 Watt Input Specifications Input Current - At no load 12 Vin models: 35 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. - At full load 12 Vin models: 215 mA max. 24 Vin models: 110 mA max. 48 Vin models: 55 mA max. Surge Voltage 12 Vin models: 25 VDC max. (1 s max.) 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Reflected Ripple Current 12 Vin models: 80 mAp-p typ. 24 Vin models: 40 mAp-p typ. 48 Vin models: 30 mAp-p typ. Recommended Input Fuse 12 Vin models: 1 600 mA (slow blow) 24 Vin models: 1 000 mA (slow blow) 48 Vin models: 1 000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Output Specifications Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.2% max. - Load Variation (0 - 100%) single output models: 1% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) - Cross Regulation dual output models: 5% max. (25% / 100% asym. load) Ripple and Noise - 20 MHz Bandwidth 30 mVp-p typ. Capacitive Load - single output 5 Vout models: 1 680 F max. 12 Vout models: 820 F max. 15 Vout models: 680 F max. - dual output 12 / -12 Vout models: 470 / 470 F max. 15 / -15 Vout models: 330 / 330 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Start-up Time 5 ms typ. Short Circuit Protection Continuous, Automatic recovery Transient Response - Response Time 250 s typ. (25% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 - Certification Documents www.tracopower.com/overview/tdr2wi Pollution Degree PD 2 EMC Specifications EMI Emissions - Conducted Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/tdr2wi External filter proposal: All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com November 27, 2020