TEC 3-2421WI TRACO Power

DC/DC Converter TEC 3WI Series, 3 Watt Compact SIP-8 package I/O-isolation voltage 1600 VDC Ultra-wide 4:1 input voltage range Fully regulated outputs Operating temperature range 40C to + 90C TEC 3WI is a new series with the design purpose to improve the prevalent 3 Watt SIP-8 DC/DC converters in terms of cost, efficiency and performance. The Continuous short circuit protection latest technology and components effectuate a high efficiency for a low thermal Remote On/Off loss. This enables an operating temperature range from -40C up to +90C. The converters are fully regulated over 0 - 100% load (no minimum load is re- 3-year product warranty quired). The models are available with ultra-wide input ranges of 4.5-18, 9-36 Designed to meet UL 62368-1 and 18-75 VDC. The functional I/O-isolation system is designed to meet IEC/- EN 62368-1 with a test voltage (60 s) of 1600 VDC. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TEC 3-1210WI 3.3 VDC 700 mA 75 % TEC 3-1211WI 5 VDC 600 mA 79 % TEC 3-1219WI 9 VDC 333 mA 81 % TEC 3-1212WI 12 VDC 250 mA 82 % 4.5 - 18 VDC TEC 3-1213WI 15 VDC 200 mA 83 % (12 VDC nom.) TEC 3-1215WI 24 VDC 125 mA 82 % TEC 3-1221WI +5 VDC 300 mA 5 VDC 300 mA 80 % TEC 3-1222WI +12 VDC 125 mA 12 VDC 125 mA 82 % TEC 3-1223WI +15 VDC 100 mA 15 VDC 100 mA 81 % TEC 3-2410WI 3.3 VDC 700 mA 76 % TEC 3-2411WI 5 VDC 600 mA 80 % TEC 3-2419WI 9 VDC 333 mA 81 % TEC 3-2412WI 12 VDC 250 mA 83 % 9 - 36 VDC TEC 3-2413WI 15 VDC 200 mA 83 % (24 VDC nom.) TEC 3-2415WI 24 VDC 125 mA 81 % TEC 3-2421WI +5 VDC 300 mA 5 VDC 300 mA 79 % TEC 3-2422WI +12 VDC 125 mA 12 VDC 125 mA 81 % TEC 3-2423WI +15 VDC 100 mA 15 VDC 100 mA 81 % TEC 3-4810WI 3.3 VDC 700 mA 74 % TEC 3-4811WI 5 VDC 600 mA 80 % TEC 3-4819WI 9 VDC 333 mA 81 % TEC 3-4812WI 12 VDC 250 mA 82 % 18 - 75 VDC TEC 3-4813WI 15 VDC 200 mA 83 % (48 VDC nom.) TEC 3-4815WI 24 VDC 125 mA 82 % TEC 3-4821WI +5 VDC 300 mA 5 VDC 300 mA 80 % TEC 3-4822WI +12 VDC 125 mA 12 VDC 125 mA 82 % TEC 3-4823WI +15 VDC 100 mA 15 VDC 100 mA 82 % Page 1 / 4 www.tracopower.com September 20, 2021TEC 3WI Series, 3 Watt Input Specifications Input Current - At no load 12 Vin models: 35 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 13 mA typ. Surge Voltage 12 Vin models: 25 VDC max. (1 s max.) 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Under Voltage Lockout 12 Vin models: 2 VDC min. / 3 VDC typ. / 4 VDC max. 24 Vin models: 6 VDC min. / 7 VDC typ. / 8 VDC max. 48 Vin models: 13 VDC min. / 15 VDC typ. / 17 VDC max. Recommended Input Fuse 12 Vin models: 1 600 mA (slow blow) 24 Vin models: 800 mA (slow blow) 48 Vin models: 500 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Output Specifications Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.2% max. dual output models: 0.2% max. - Load Variation (0 - 100%) single output models: 1% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) - Cross Regulation dual output models: 5% max. (25% / 100% asym. load) Ripple and Noise - 20 MHz Bandwidth 75 mVp-p typ. Capacitive Load - single output 3.3 Vout models: 4 400 F max. 5 Vout models: 2 200 F max. 9 Vout models: 1 300 F max. 12 Vout models: 1 000 F max. 15 Vout models: 820 F max. 24 Vout models: 470 F max. - dual output 5 / -5 Vout models: 1 200 / 1 200 F max. 12 / -12 Vout models: 520 / 520 F max. 15 / -15 Vout models: 440 / 440 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Start-up Time 10 ms typ. / 20 ms max. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 130 - 230% of Iout max. 170% typ. of Iout max. Transient Response - Response Time 500 s typ. (25% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment Designed for EN 62368-1 (no certification) EMC Specifications EMI Emissions - Conducted Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/tec3wi External filter proposal: All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com September 20, 2021