TEN 15-2422WI TRACO Power

DC/DC Converters TEN 15WI Series, 15 Watt Features UL 60950-1 Ultra-wide 4:1 input range High efcfi iency up to 86 % Extended operating temperature range 40C to +85C max. Indenfi ite short circuit protection I/O isolation 1500 VDC B uilt-in filter meets EN 55022, Class A and F CC, Level A without external components Remote On/Off Industry standard pinout Six-side shielded case Lead free design, fully RoHS compliant 3year product warranty The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industri- al systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of 40C to +85C. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 15-2410WI 3,3 VDC 3000 mA 78 % TEN 15-2411WI 5,1 VDC 2950 mA 82 % 9 36 VDC TEN 15-2412WI 12 VDC 1250 mA 85 % (24 VDC nominal) TEN 15-2422WI 12 VDC 625 mA 85 % TEN 15-2423WI 15 VDC 500 mA 86 % TEN 15-4810WI 3,3 VDC 3000 mA 78 % TEN 15-4811WI 5,1 VDC 2950 mA 82 % 18 75 VDC TEN 15-4812WI 12 VDC 1250 mA 85 % (48 VDC nominal) TEN 15-4822WI 12 VDC 625 mA 85 % TEN 15-4823WI 15 VDC 500 mA 86 % DC/DC Converters TEN 15WI 15 Watt Input Specifications Input current at no load 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. Input current at full load 24 Vin 3.3 Vout models: 528 mA typ. 24 Vin other output models: 740 mA typ. 48 Vin 3.3 Vout models: 264 mA typ. 48 Vin other output models: 370 mA typ. Surge voltage 24 Vin models: 50 V max. (100 msec. max.) 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy 1 % Regulation Input variation Vin min. to Vin max. 0.5 % max. Load variation 10 100 % 1 % max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient 0.02 %/K Output current limitation >110 % of Iout max., foldback Short circuit protection indefinite (automatic recovery) Capacitive load single output models: 470 F max. dual output models: 220 F max. General Specifications Temperature ranges Operating 40C to +85C (40F to +185F) Case temperature +100C max. Storage 55C to +125C (67F to +257F) Load derating without heatsink 2.5 %/K above 60C with heatsink 3.3 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >700000 h Isolation voltage (60 sec.) Input/Output 1500 VDC Isolation capacitance Input/Output 1200 pF typ Isolation resistance Input/Output (500 VDC) >1000 MOhm Switching frequency (fixed) 330 kHz typ. (pulse width modulation) Remote On/Off: On: 2.5 ... 5.5 VDC or open circuit. Off: -0.7 ... 0.8 VDC or short circuit pin 2 and pin 6 Off idle current: 10 mA max. Safety approvals cUL/UL 60950-1, IEC/EN 60950-1 Certification documents www.tracopower.com/overview/ten15wi Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS RoHS directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material Silicon TSE-3331A/B (flammability to UL 94V-0) Weight 32 g (1.09oz) Soldering temperature max. 265C / 10 sec. All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.