TEN 3-4821WIN TRACO Power

DC/DC Converter TEN 3WIN Series, 3 Watt Ultra wide 4:1 input range Input filter to meet EN 55032, Class A and FCC, level A without external components Extended operating temperature range 40C to 85C Models with 1500 VDC and 3000 VDC UL 62368-1 IEC 62368-1 I/O isolation (functional insulation) The TEN 3WIN Series is a drop in replacement of the prevalent TEN 3WI Se- DIP-24 package ries. The up-to date design enables a cost reduction without any compromise to reliability and function. They come with an internal filter to meet EN55032 High reliability, MTBF >1.0 Mio. h class A without external components. Increased EMC immunity and extended operating temperature range of -40C to 85C make these converters an ideal 3-year product warranty solution for cost critical but demanding applications. With the standard pinning it is a drop in replacement for common 3 Watt converters in DIP24 package. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TEN 3-2410WIN 3.3 VDC 750 mA 77 % TEN 3-2411WIN 5 VDC 600 mA 79 % TEN 3-2412WIN 12 VDC 250 mA 82 % TEN 3-2413WIN 9 - 36 VDC 15 VDC 200 mA 83 % (24 VDC nom.) TEN 3-2415WIN 24 VDC 125 mA 81 % TEN 3-2421WIN +5 VDC 250 mA 5 VDC 250 mA 80 % TEN 3-2422WIN +12 VDC 125 mA 12 VDC 125 mA 82 % TEN 3-2423WIN +15 VDC 100 mA 15 VDC 100 mA 82 % TEN 3-4810WIN 3.3 VDC 750 mA 77 % TEN 3-4811WIN 5 VDC 600 mA 80 % TEN 3-4812WIN 12 VDC 250 mA 83 % TEN 3-4813WIN 18 - 75 VDC 15 VDC 200 mA 84 % (48 VDC nom.) TEN 3-4815WIN 24 VDC 125 mA 82 % TEN 3-4821WIN +5 VDC 250 mA 5 VDC 250 mA 80 % TEN 3-4822WIN +12 VDC 125 mA 12 VDC 125 mA 82 % TEN 3-4823WIN +15 VDC 100 mA 15 VDC 100 mA 82 % Options Suffix -HI - Models with high isolation (3000 VDC), except 3.3 Vout models Page 1 / 4 www.tracopower.com December 16, 2021TEN 3WIN Series, 3 Watt Input Specifications Input Current - At no load 24 Vin models: 30 mA typ. 48 Vin models: 20 mA typ. - At full load 24 Vin models: 150 mA typ. 48 Vin models: 75 mA typ. Surge Voltage 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Under Voltage Lockout 24 Vin models: 8.5 VDC max. 48 Vin models: 17.5 VDC max. Reflected Ripple Current 24 Vin models: 15 mAp-p typ. 48 Vin models: 10 mAp-p typ. Recommended Input Fuse (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Pi-Type Short Circuit Input Power 2 W max. Output Specifications Voltage Set Accuracy 2% max. Regulation - Input Variation (Vmin - Vmax) single output models: 1% max. dual output models: 1% max. - Load Variation (0 - 100%) single output models: 1% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) - Voltage Balance dual output models: 2% max. (symmetrical load) Ripple and Noise - 20 MHz Bandwidth 70 mVp-p max. Capacitive Load - single output 3.3 Vout models: 680 F max. 5 Vout models: 470 F max. 12 Vout models: 330 F max. 15 Vout models: 220 F max. 24 Vout models: 100 F max. - dual output 5 / -5 Vout models: 220 / 220 F max. 12 / -12 Vout models: 150 / 150 F max. 15 / -15 Vout models: 100 / 100 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Short Circuit Protection Continuous, Automatic recovery Overload Protection Foldback Mode Output Current Limitation 120% min. of Iout max. 150% typ. of Iout max. Transient Response - Response Deviation 3% typ. / 5% max. (75% to 100% Load Step) - Response Time 200 s typ. / 500 s max. (75% to 100% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten3win - Certification Documents Pollution Degree PD 3 Over Voltage Category Not mains connected All specifications valid at nominal voltage, resistive full load and +25C after warm-up time, unless otherwise stated. Page 2 / 4 www.tracopower.com December 16, 2021