TEN 5-4810 TRACO Power

DC/DC Converters TEN 5 Series, 6 Watt Features UL 60950-1 Wide 2:1 input range Full SMD-design High efcfi iency up to 86% Extended operating temperature range 40C to 85C I/O isolation 1500 VDC Indenfi ite short circuit protection Input filter to meet EN 55022, class A and FCC, level A without external components The TEN 5 Series is a range of DC/DC-converter modules with wide input range Shielded metal case with insulated of 2:1. State of the art SMD-technology guarantees a product with very high re- baseplate liability and good cost /performance ratio. I/O-isolation of 1500 VDC together 24-pin DIP with industry standard pinout with conducted noise compliance to EN 55022-A and FCC level A makes these High reliability, MTBF >1 Mio. h converters ideal for a wide range of applications in communications, mobile bat- tery powered equipments and industrial systems. 3-year product warranty Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 5-0510 3.3 VDC 1200 mA 75 % TEN 5-0511 5 VDC 1000 mA 79 % TEN 5-0512 12 VDC 500 mA 82 % 4.5 7 VDC TEN 5-0513 15 VDC 400 mA 82 % (5 VDC nominal) TEN 5-0521 5 VDC 500 mA 79 % 12 VDC 250 mA 82 % TEN 5-0522 TEN 5-0523 15 VDC 200 mA 82 % TEN 5-1210 3.3 VDC 1200 mA 77 % TEN 5-1211 5 VDC 1000 mA 81 % TEN 5-1212 12 VDC 500 mA 84 % 9 18 VDC TEN 5-1213 15 VDC 400 mA 84 % (12 VDC nominal) TEN 5-1221 5 VDC 500 mA 81 % TEN 5-1222 12 VDC 250 mA 84 % TEN 5-1223 15 VDC 200 mA 84 % TEN 5-2410 3.3 VDC 1200 mA 79 % TEN 5-2411 5 VDC 1000 mA 83 % TEN 5-2412 12 VDC 500 mA 86 % 18 36 VDC TEN 5-2413 15 VDC 400 mA 86 % (24 VDC nominal) TEN 5-2421 5 VDC 500 mA 83 % TEN 5-2422 12 VDC 250 mA 86 % TEN 5-2423 15 VDC 200 mA 86 % TEN 5-4810 3.3 VDC 1200 mA 79 % TEN 5-4811 5 VDC 1000 mA 83 % TEN 5-4812 12 VDC 500 mA 86 % 36 75 VDC TEN 5-4813 15 VDC 400 mA 86 % (48 VDC nominal) TEN 5-4821 5 VDC 500 mA 83 % TEN 5-4822 12 VDC 250 mA 86 % TEN 5-4823 15 VDC 200 mA 86 % DC/DC Converters TEN 5 Series 6 Watt Input Specifications Input current no load 5 Vin models: 80 mA typ. 12 Vin models: 30 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 8 mA typ. Start-up voltage / 5 Vin models: 4.4 VDC / 4.0 VDC (or lower) under voltage shut down 12 Vin models: 8.0 VDC / 8.0 VDC (or lower) 24 Vin models: 16.0 VDC / 16.0 VDC (or lower) 48 Vin models: 32.0 VDC / 32.0 VDC (or lower) long term operation at undervoltage will demage the converter Surge voltage (1 sec. max.) 5 Vin models: 10 V max. 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy 1.0 % Regulation Input variation Vin min. to Vin max. 0.3 % max. Load variation 20 100 % single output models: 1.0 % max. dual output models balanced load: 2.0 % max. dual output models unbalanced load: 5.0 % max. (25 % / 100 %) Minimum load 5 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ., 75 mVpk-pk max. Temperature coefficient 0.02 %/K Output current limitation >120 % of Iout max., foldback Short-circuit protection indefinite (automatic recovery) Start up time (nominal Vin and constant resistive load) 10 ms typ. (for power on and remote on) Capacitive load single output models: 6800 F max. dual output models: 1000 F max. (each output) General Specifications Temperature ranges Operating 40C to +85C Case temperature +90C max. Storage 50C to +125C Derating 3.3 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1 Mio. h Isolation voltage (60 sec.) Input/Output 1500 VDC Isolation capacitance Input/Output 380 pF typ. Isolation resistance Input/Output >1000 M Ohm (500 VDC) Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 60950-1, IEC/EN 60950-1 Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS directive 2011/65/EU All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.