TEN 8-2412 TRACO Power

DC/DC Converters TEN 8 Series, 8 Watt Features DIP24 package with industry standard footprint Wide 2:1 input voltage range Input filter meets EN 55022, class A Extended operating temperature range: -40C to +85C Remote On/Off Shielded metal casing with insulated baseplate Lead free design, RoHS compliant 3-year product warranty The TEN 8 series is a family of high performance 8 Watt dc/dc-converter modules featuring wide 2:1 input voltage ranges in a DIP-24 package with industry stan- dard footprint. A very high efcfi iency allows an operating temperature range of 40C to +85C. A built-in EMI input filter complies with EN 55022, class A without external components. Further standard features include remote On/Off and short- circuit protection. Typical applications for these converters are battery operated equipment, instru- mentation, communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 8-1210 3.3 VDC 2000 mA 80 % TEN 8-1211 5 VDC 1500 mA 83 % TEN 8-1212 12 VDC 665 mA 88 % 9 18 VDC TEN 8-1213 15 VDC 535 mA 87 % (12 VDC nominal) TEN 8-1221 5 VDC 800 mA 83 % TEN 8-1222 12 VDC 335 mA 87 % TEN 8-1223 15 VDC 265 mA 85 % TEN 8-2410 3.3 VDC 2000 mA 80 % TEN 8-2411 5 VDC 1500 mA 83 % TEN 8-2412 12 VDC 665 mA 86 % 18 36 VDC TEN 8-2413 15 VDC 535 mA 85 % (24 VDC nominal) TEN 8-2421 5 VDC 800 mA 82 % TEN 8-2422 12 VDC 335 mA 86 % TEN 8-2423 15 VDC 265 mA 85 % TEN 8-4810 3.3 VDC 2000 mA 80 % TEN 8-4811 5 VDC 1500 mA 83 % TEN 8-4812 12 VDC 665 mA 86 % 36 75 VDC TEN 8-4813 15 VDC 535 mA 86 % (48 VDC nominal) TEN 8-4821 5 VDC 800 mA 85 % TEN 8-4822 12 VDC 335 mA 87 % TEN 8-4823 15 VDC 265 mA 87 % DC/DC Converters TEN 8 Series 8 Watt Input Specifications Input current (no load) 12 Vin models: 15 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 10 mA typ. Input current (full load) 12 Vin 3.3 VDC models: 720 mA typ. 12 Vin other output models: 800 mA typ. 24 Vin 3.3 VDC models: 360 mA typ. 24 Vin other output models: 400 mA typ. 48 Vin 3.3 VDC models: 180 mA typ. 48 Vin other output models: 200 mA typ. Surge voltage (100 msec. max.) 12 Vin models: 36 V max.. 24 Vin models: 50 V max.. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A See Application Note: www.tracopower.com/overview/ten8 ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, 2 kV, perf. criteria A EN 61000-4-5, 1 kV perf. criteria A With external input capacitor e.g. Nippon chemi-con KY 220 F, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy 1 % Regulation Input variation Vin min. to Vin max 0.2 % max. Load variation 0 100 % single output models: 1 % max. dual output models: 1 % max. (balanced load) 5 % max. (Load cross variation 25 % / 100 %) Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ. Start up time (nominal Vin and constant resistive load) 700 ms max. Remote on/off 5 ms typ. Transient response (25% load step change) 200 s typ. Short circuit protection indefinite (automatic recovery) Over load protection 150 % of Iout max. typ. foldback Capacitive load 3.3 Vout models: 3300 F max. 5 Vout models / 5 Vout models: 1600 F max. / 1000 F max. 12 Vout models / 12 Vout models: 350 F max. / 160 F max. 15 Vout models / 15 Vout models: 240 F max. / 100 F max. General Specifications Temperature ranges Operating 40C to +85C Casing +100C max. Storage 55C to +105C Derating 3.3 %/K above +70C Humidity (non condensing) 95 % rel H max. All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.