DC/DC Converter TES 2M Series, 2 Watt Supplementary and reinforced insulation I/O isolation 4000 VACrms rated for 300 Vrms working voltage Unregulated device 2 x MOOP Medical safety ES 60601-1 IEC 60601-1 Industrial safety to UL/IEC/EN 60950-1 UL 62368-1 IEC 62368-1 Ultracompact SMD-package The TES 2M series is range of compact 2W DC/DC-converters providing a high I/O-isolation voltage of 4000 VAC. With a reinforced I/O-isolation system this Operating temp. range 25C to +80C product is an economical solution for many applications in instrumentation, in- Qualified for leadfree reflow solder dustrial controls, medical equipment and everywhere where supplementary- or process reinforced insulation is required. These converters are qualified for high solder temperature profiles in leadfree solder processes. For automated SMD produc- Available in tape & reel package tion lines the devices can be supplied in tape & reel package. Full SMD-design 3-year product warranty with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TES 2-0511M 5 VDC 400 mA 66 % TES 2-0512M 12 VDC 165 mA 66 % 4.5 - 5.5 VDC TES 2-0513M 15 VDC 133 mA 66 % (5 VDC nom.) TES 2-0522M +12 VDC 83 mA 12 VDC 83 mA 72 % TES 2-0523M +15 VDC 66 mA 15 VDC 66 mA 73 % TES 2-1211M 5 VDC 400 mA 66 % TES 2-1212M 12 VDC 165 mA 66 % 10.8 - 13.2 VDC TES 2-1213M 15 VDC 133 mA 66 % (12 VDC nom.) TES 2-1222M +12 VDC 83 mA 12 VDC 83 mA 74 % TES 2-1223M +15 VDC 66 mA 15 VDC 66 mA 75 % 5 VDC 400 mA 66 % TES 2-2411M TES 2-2412M 12 VDC 165 mA 66 % 21.6 - 26.4 VDC TES 2-2413M 15 VDC 133 mA 66 % (24 VDC nom.) TES 2-2422M +12 VDC 83 mA 12 VDC 83 mA 74 % TES 2-2423M +15 VDC 66 mA 15 VDC 66 mA 75 % Page 1 / 4 www.tracopower.com January 5, 2022TES 2M Series, 2 Watt Input Specifications Input Current - At no load 5 Vin models: 90 mA typ. 12 Vin models: 40 mA typ. 24 Vin models: 30 mA typ. - At full load 5 Vin models: 580 mA typ. 12 Vin models: 240 mA typ. 24 Vin models: 120 mA typ. Surge Voltage 5 Vin models: 9 VDC max. (1 s max.) 12 Vin models: 18 VDC max. (1 s max.) 24 Vin models: 30 VDC max. (1 s max.) Recommended Input Fuse 5 Vin models: 1 000 mA (slow blow) 12 Vin models: 500 mA (slow blow) 24 Vin models: 200 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Output Specifications Voltage Set Accuracy 4% max. Regulation - Input Variation (Vmin - Vmax) single output models: 1.5% max. dual output models: 1.5% max. - Load Variation (20 - 100%) single output models: 12% max. (5 VCD models) 10% max. (other models) dual output models: 10% max. (Output 1) 10% max. (Output 2) - Voltage Balance dual output models: 1% max. (symmetrical load) Ripple and Noise - 20 MHz Bandwidth 150 mVp-p max. Capacitive Load - single output 5 Vout models: 330 F max. 12 Vout models: 330 F max. 15 Vout models: 330 F max. - dual output 12 / -12 Vout models: 100 / 100 F max. 15 / -15 Vout models: 100 / 100 F max. Minimum Load 2 % of Iout max. Temperature Coefficient 0.02 %/K max. Start-up Time 500 ms max. Short Circuit Protection Limited 0.5 s max., Automatic recovery Safety Specifications Safety Standards - IT / Multimedia Equipment EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 - Medical Equipment EN 60601-1 IEC 60601-1 ANSI/AAMI ES 60601-1 CSA-C22.2, No 60601-1 2 x MOOP (Means Of Operator Protection) MOPP (Means Of Patient Protection) www.tracopower.com/overview/tes2m - Certification Documents Pollution Degree PD 2 All specifications valid at nominal voltage, resistive full load and +25C after warm-up time, unless otherwise stated. Page 2 / 4 www.tracopower.com January 5, 2022
