TES 5-2413 TRACO Power

DC/DC Converters TES 5 Series, 5 Watt CB UL 60950-1 Features Scheme Compact low prolfi e SMD package Wide 2:1 input voltage range I/O isolation 1500VDC Operating temp. range 40C to +85C max. Short circuit protection Remote On/Off High accuracy of pin co-planarity Lead free design RoHS compliant 3-years product warranty The TES-5 series is a new range of high performance 5W dc-dc converter modules in low prole Sfi MD package with compact dimensions of only 33.4 x 20.6 x 10.2 mm. The 18 available models feature wide 2:1 input voltage range and tightly regulated output voltage. High efcfi iency allows operating temperatures up to 71C at full load. Further features are built-in EMI-lfi ter to meet EN 55022,class A and FCC, level A without additional components and remote On/Off control. The products are qua- liefi d for soldering in a high temperature lead-free reflow solder process. Typical applications for these converters are battery powered equipment, instrumentation, communication systems and industrial controls. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 5-1210 3.3 VDC 1200 mA 76 % TES 5-1211 5 VDC 1000 mA 80 % TES 5-1212 12 VDC 420 mA 83 % 9 18 VDC TES 5-1213 15 VDC 335 mA 83 % (12 VDC nominal) TES 5-1221 5 VDC 500 mA 80 % TES 5-1222 12 VDC 210 mA 83 % TES 5-1223 15 VDC 165 mA 83 % TES 5-2410 3.3 VDC 1200 mA 78 % TES 5-2411 5 VDC 1000 mA 82 % TES 5-2412 12 VDC 420 mA 85 % 18 36 VDC TES 5-2413 15 VDC 335 mA 85 % (24 VDC nominal) TES 5-2421 5 VDC 500 mA 82 % TES 5-2422 12 VDC 210 mA 85 % TES 5-2423 15 VDC 165 mA 85 % TES 5-4810 3.3 VDC 1200 mA 78 % TES 5-4811 5 VDC 1000 mA 82 % TES 5-4812 12 VDC 420 mA 85 % 36 75 VDC TES 5-4813 15 VDC 335 mA 85 % (48 VDC nominal) TES 5-4821 5 VDC 500 mA 82 % TES 5-4822 12 VDC 210 mA 85 % TES 5-4823 15 VDC 165 mA 85 % DC/DC Converters TES 5 Series 5 Watt Input Specifications Input current no load 12 Vin models 20 mA 24 Vin models 5 mA 48 Vin models 3 mA Input current full load 12 Vin models 500 mA typ. 24 Vin models 250 mA typ. 48 Vin models 125 mA typ. Start-up voltage / 12 Vin models 8 VDC / 7 VDC typ. under voltage shut down 24 Vin models 16 VDC / 15 VDC typ. 48 Vin models 33 VDC / 31 VDC typ. Surge voltage (1 sec. max.) 12 Vin models 25 V max. 24 Vin models 50 V max. 48 Vin models 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, class A Output Specifications Voltage set accuracy 1 % Regulation Input variation Vin min. to Vin max. 0.3 % max. Load variation 20 100 % single output models 1 % max. dual output models balanced load 2 % max. Ripple and noise (20 MHz Bandwidth) 85 mVpk-pk max. Temperature coefficient 0.02 %/C Output current limitation >115 % of Iout max., constant current Short circuit protection indefinite, automatic recovery Capacitive load single output models 680 F max. dual output models 100 F max. (each output) General Specifications Temperature ranges Operating 40C to +85C Case temperature +100C max. Storage 40C to +125C Derating 3.5 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1 Mio. h Isolation voltage (60sec.) Input/Output 1500 VDC Isolation capacitance Input/Output 650 pF typ. Isolation resistance Input/Output (500 VDC) >1000 MOhm Switching frequency 260 kHz typ. Safety standards UL 60950-1 , IEC/EN 60950-1 Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS RoHS directive 2011/65/EU Remote On/Off On: 2.5 ... 5.5 VDC or open circuit Off: -0.7 ... 0.8 VDC or short circuit pin 1 and 2(/3) Off idle current: 10 mA All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.