THD 10-2422WIN TRACO Power

DC/DC Converter THD 10WIN Series, 10 Watt UItra wide 4:1 input voltage range Internal EMI-filter meets EN 55022, Class A without external components High efficiency up to 87% Operating temperature range 40C to +85C UL 62368-1 IEC 62368-1 I/O isolation 1500 VDC The THD 10WIN series is designed for an optimized cost/performance ratio of Overload protection DC/DC converters with output power of 10 Watt. They come with an internal EMI-filter to meet EN 55022, class A without external components. General 3-year product warranty features like no minimum load requirement, overload protection and high effi- ciency make these converters easy to design in. With the popular DIP-24 stan- dard package they are also a drop in replacement for many cost critical applica- tions. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. THD 10-2410WIN 3.3 VDC 2 700 mA 86 % THD 10-2411WIN 5.1 VDC 2 000 mA 85 % THD 10-2412WIN 12 VDC 833 mA 87 % 9 - 36 VDC THD 10-2413WIN 15 VDC 666 mA 87 % (24 VDC nom.) THD 10-2415WIN 24 VDC 416 mA 87 % THD 10-2422WIN +12 VDC 416 mA 12 VDC 416 mA 87 % THD 10-2423WIN +15 VDC 333 mA 15 VDC 333 mA 87 % THD 10-4810WIN 3.3 VDC 2 700 mA 86 % THD 10-4811WIN 5.1 VDC 2 000 mA 85 % THD 10-4812WIN 12 VDC 833 mA 87 % 18 - 75 VDC THD 10-4813WIN 15 VDC 666 mA 87 % (48 VDC nom.) THD 10-4815WIN 24 VDC 416 mA 87 % THD 10-4822WIN +12 VDC 416 mA 12 VDC 416 mA 87 % THD 10-4823WIN +15 VDC 333 mA 15 VDC 333 mA 87 % Page 1 / 4 www.tracopower.com September 16, 2021THD 10WIN Series, 10 Watt Input Specifications Input Current - At no load 24 Vin models: 30 mA typ. 48 Vin models: 20 mA typ. - At full load 24 Vin models: 470 mA typ. 48 Vin models: 240 mA typ. Surge Voltage 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Start-up Voltage 24 Vin models: 7 VDC min. / 8 VDC typ. / 9 VDC max. 48 Vin models: 14 VDC min. / 16 VDC typ. / 18 VDC max. Under Voltage Lockout 24 Vin models: 8.5 VDC max. 48 Vin models: 17 VDC max. Reflected Ripple Current 24 Vin models: 40 mAp-p typ. 30 mAp-p typ. 48 Vin models: Recommended Input Fuse 24 Vin models: 2 000 mA (slow blow) 48 Vin models: 1 000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Pi-Type Output Specifications Voltage Set Accuracy 2% max. Regulation - Input Variation (Vmin - Vmax) single output models: 1% max. dual output models: 1% max. - Load Variation (0 - 100%) single output models: 1.2% max. dual output models: 1.2% max. (Output 1) 1.2% max. (Output 2) - Voltage Balance dual output models: 2% max. (symmetrical load) Ripple and Noise - 20 MHz Bandwidth 100 mVp-p max. Capacitive Load - single output 3.3 Vout models: 1 000 F max. 5.1 Vout models: 1 000 F max. 12 Vout models: 470 F max. 15 Vout models: 330 F max. 24 Vout models: 150 F max. - dual output 12 / -12 Vout models: 220 / 220 F max. 15 / -15 Vout models: 150 / 150 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 150% typ. of Iout max. Transient Response - Response Deviation 3% typ. / 5% max. (75% to 100% Load Step) - Response Time 300 s typ. / 600 s max. (75% to 100% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 - Certification Documents www.tracopower.com/overview/thd10win Pollution Degree PD 2 All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com September 16, 2021