DC/DC Converter THD 15WIN Series, 15 Watt Highest power density in DIP 24 package Shielded metal case with isolated Baseplate Very high efficiency up to 90% Ultra wide 4:1 input ranges UL 62368-1 IEC 62368-1 No minimum load required The THD 15WIN series models provide 15 Watt output power out of a very Input filter meets EN 55022 class A compact shielded metal case that occupies only 1 inch of board space. The without external components converters work with a high efficiency over the full load range and draw a very low input current at no load conditions. All models have a wide 4:1 input volt- I/O isolation voltage 1500 VDC age range and a precisely regulated output voltage. Typical applications for Operating temp. range : 40C to these converters are mobile equipment, instrumentation, distributed power ar- +85C chitectures in communication and industrial electronics and everywhere where space on PCB is critical Remote On/Off control Industry standard pinout Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. THD 15-2410WIN 3.3 VDC 4 000 mA 88 % THD 15-2411WIN 5.1 VDC 3 000 mA 90 % THD 15-2412WIN 12 VDC 1 250 mA 90 % 9 - 36 VDC THD 15-2413WIN 15 VDC 1 000 mA 90 % (24 VDC nom.) THD 15-2421WIN +5 VDC 1 500 mA 5 VDC 1 500 mA 86 % THD 15-2422WIN +12 VDC 625 mA 12 VDC 625 mA 89 % THD 15-2423WIN +15 VDC 500 mA 15 VDC 500 mA 90 % THD 15-4810WIN 3.3 VDC 4 000 mA 89 % 5.1 VDC 3 000 mA 89 % THD 15-4811WIN THD 15-4812WIN 12 VDC 1 250 mA 90 % 18 - 75 VDC THD 15-4813WIN 15 VDC 1 000 mA 90 % (48 VDC nom.) THD 15-4821WIN +5 VDC 1 500 mA 5 VDC 1 500 mA 86 % THD 15-4822WIN +12 VDC 625 mA 12 VDC 625 mA 89 % THD 15-4823WIN +15 VDC 500 mA 15 VDC 500 mA 90 % Page 1 / 4 www.tracopower.com December 2, 2021THD 15WIN Series, 15 Watt Input Specifications Input Current - At no load 24 Vin models: 6 mA typ. 48 Vin models: 4 mA typ. - At full load 24 Vin models: 740 mA max. 48 Vin models: 370 mA max. Surge Voltage 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Under Voltage Lockout 24 Vin models: 7 VDC min. / 8 VDC typ. / 8.8 VDC max. 48 Vin models: 15 VDC min. / 16 VDC typ. / 17.5 VDC max. Reflected Ripple Current 20 mAp-p typ. Recommended Input Fuse 24 Vin models: 3 150 mA (slow blow) 48 Vin models: 1 600 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Pi-Type Output Specifications Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.2% max. dual output models: 0.5% max. - Load Variation (0 - 100%) single output models: 0.5% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) - Cross Regulation dual output models: 5% max. (25% / 100% asym. load) Ripple and Noise - 20 MHz Bandwidth 60 mVp-p typ. Capacitive Load - single output 3.3 Vout models: 4 700 F max. 5.1 Vout models: 3 300 F max. 12 Vout models: 600 F max. 15 Vout models: 400 F max. - dual output 5 / -5 Vout models: 1 500 / 1 500 F max. 12 / -12 Vout models: 288 / 288 F max. 15 / -15 Vout models: 200 / 200 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Start-up Time 60 ms max. (Power Up) 60 ms max. (Remote On) Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 150% typ. of Iout max. Overvoltage Protection 118 - 125% of Vout nom. (depending on model) 3.9 VDC typ. (3.3 Vout models) 6.2 VDC typ. (5.1 Vout models) 15 VDC typ. (12 Vout models) 18 VDC typ. (15 Vout models) Transient Response - Response Deviation 9% max. (25% Load Step) - Response Time 250 s typ. (25% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/thd15win - Certification Documents All specifications valid at nominal voltage, resistive full load and +25C after warm-up time, unless otherwise stated. Page 2 / 4 www.tracopower.com December 2, 2021