THL 15-2423WI TRACO Power

DC/DC Converter THL 15WI Series, 15 Watt 15 Watt converter in a 1 x 1 metal package Cost efficient design Ultra wide 4:1 input voltage range: 9-36 and 18-75 VDC Operating temperature range -40 to +70 C without derating UL 62368-1 IEC 62368-1 Internal EN 55032 class A filter The THL 15WI series is Traco Power s latest addition to the existing 15 Watt DC/DC converter range. With the focus on combining cost efficiency and quali- 1 500 VDC I/O-isolation ty this isolated high performance 15 Watt DC/DC converter is suitable for many different applications. The series comes in an encapsulated, shielded 1 x 1 x Protection against overvoltage, 0.4 metal package and has a fully integrated EN 55032 class A filter. High ef- overload and short circuit ficiency up to 91% enables the converter to operate from 40C to +70C Remote On/Off and trim function without derating. All models have an ultra wide 4:1 input voltage range and precisely regulated, isolated outputs. The series meets the latest IT safety certi- Optional heatsink for increased fications (UL 62368-1) and is thus eligible for uses in mobile equipment, instru- temperature capabilities mentation, distributed power architectures in communication and industrial 3-year product warranty electronics and everywhere where cost efficiency and quality are critical fac- tors. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. THL 15-2410WI 3.3 VDC 3 400 mA 86 % THL 15-2411WI 5 VDC 3 000 mA 88 % THL 15-2412WI 12 VDC 1 250 mA 88 % 9 - 36 VDC THL 15-2413WI 15 VDC 1 000 mA 89 % (24 VDC nom.) THL 15-2415WI 24 VDC 625 mA 91 % THL 15-2422WI +12 VDC 625 mA 12 VDC 625 mA 89 % THL 15-2423WI +15 VDC 500 mA 15 VDC 500 mA 89 % THL 15-4810WI 3.3 VDC 3 400 mA 86 % THL 15-4811WI 5 VDC 3 000 mA 88 % THL 15-4812WI 12 VDC 1 250 mA 89 % 18 - 75 VDC THL 15-4813WI 15 VDC 1 000 mA 89 % (48 VDC nom.) THL 15-4815WI 24 VDC 625 mA 91 % THL 15-4822WI +12 VDC 625 mA 12 VDC 625 mA 90 % THL 15-4823WI +15 VDC 500 mA 15 VDC 500 mA 89 % Options THL-HS1 - Optional Heat Sink: www.tracopower.com/products/thl-hs1.pdf Page 1 / 4 www.tracopower.com December 9, 2021THL 15WI Series, 15 Watt Input Specifications Input Current - At no load 24 Vin models: 12 mA typ. 48 Vin models: 9 mA typ. - At full load 24 Vin models: 680 mA typ. 48 Vin models: 340 mA typ. Surge Voltage 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Under Voltage Lockout 24 Vin models: 7.5 VDC typ. 48 Vin models: 16 VDC typ. Reflected Ripple Current 24 Vin models: 50 mAp-p typ. 48 Vin models: 30 mAp-p typ. Recommended Input Fuse 24 Vin models: 3 800 mA (slow blow) 48 Vin models: 1 900 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal LC-Type Output Specifications Output Voltage Adjustment 10% (single output models only) (By external trim resistor) www.tracopower.com/overview/thl15wi See application note: Output power must not exceed rated power Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.2% max. dual output models: 0.5% max. - Load Variation (0 - 100%) single output models: 0.5% max. (3.3 & 5 Vout models) 0.2% max. (other output models) dual output models: 1% max. (Output 1) 1% max. (Output 2) - Voltage Balance dual output models: 2% max. (symmetrical load) - Cross Regulation dual output models: 5% max. (25% / 100% asym. load) Ripple and Noise - single output 3.3 Vout models: 75 mVp-p max. (w/ 1 F, MLCC) (20 MHz Bandwidth) 5 Vout models: 75 mVp-p max. (w/ 1 F, MLCC) 12 Vout models: 100 mVp-p max. (w/ 1 F, MLCC) 15 Vout models: 100 mVp-p max. (w/ 1 F, MLCC) 24 Vout models: 150 mVp-p max. (w/ 1 F, MLCC) - dual output 12 / -12 Vout models: 100 / 100 mVp-p max. (w/ 1 F, MLCC) 15 / -15 Vout models: 100 / 100 mVp-p max. (w/ 1 F, MLCC) Capacitive Load - single output 3.3 Vout models: 5 800 F max. 5 Vout models: 5 100 F max. 12 Vout models: 870 F max. 15 Vout models: 560 F max. 24 Vout models: 220 F max. - dual output 12 / -12 Vout models: 440 / 440 F max. 15 / -15 Vout models: 280 / 280 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Start-up Time 30 ms max. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 130 - 180% of Iout max. 150% typ. of Iout max. Overvoltage Protection 120% typ. of Vout nom. Transient Response - Response Deviation 3% typ. / 5% max. (75% to 100% Load Step) - Response Time 300 s typ. (75% to 100% Load Step) All specifications valid at nominal voltage, resistive full load and +25C after warm-up time, unless otherwise stated. Page 2 / 4 www.tracopower.com December 9, 2021