THL 20-2415WI TRACO Power

DC/DC Converters THL 20WI Series, 20 Watt Features Smallest encapsulated 20W converter 226037 IEC 60950-1 Ultra compact size: 1.0 x 1.0 x 0.4 Shielded metal case with isolated baseplate Ultrawide 4:1 input voltage ranges Very high efcfi iency up to 90% Output voltage adjustable Remote On/Off control Operating temp. range 40C to +75C and up to +85C with heat-sink I/O isolation voltage 1500 VDC Lead free design, RoHS compliant 3-year product warranty The THL 20WI series is the latest generation of dc-dc converter modules with highest power density. The product achieves 20 Watt output power while it comes in a metal case with dimensions of only 1.0x 1.0x 0.4. All models have an ultra wide 4:1 input voltage range and precisely regulated out- put voltages. Highest efcfi iency of up to 90% makes this product very reliable and applicable in temperature ranges of up to +75C or +85C with optional mounted heat sink. Typical applications are in mobile equipments, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THL 20-2410WI 3.3 VDC 4500 mA 87 % THL 20-2411WI 5.0 VDC 4000 mA 89 % THL 20-2412WI 12 VDC 1670 mA 89 % 9 36 VDC THL 20-2413WI 15 VDC 1340 mA 89 % (24 VDC nominal) THL 20-2415WI 24 VDC 835 mA 88 % THL 20-2422WI 12 VDC 835 mA 89 % THL 20-2423WI 15 VDC 670 mA 89 % THL 20-4810WI 3.3 VDC 4500 mA 88 % THL 20-4811WI 5.0 VDC 4000 mA 89 % THL 20-4812WI 12 VDC 1670 mA 89 % 18 75 VDC THL 20-4813WI 15 VDC 1340 mA 89 % (48 VDC nominal) 24 VDC 835 mA 88 % THL 20-4815WI THL 20-4822WI 12 VDC 835 mA 89 % THL 20-4823WI 15 VDC 670 mA 89 % DC/DC Converters THL 20WI Series 20 Watt Input Specifications Input current at no load 24 Vin 3.3 VDC models: 80 mA typ. (at nominal input voltage) 5.0 VDC models: 90 mA Typ. all other models: 40 mA typ. 48 Vin 3.3 VDC models: 40 mA typ. 5.0 VDC models: 45 mA typ. all other models: 25 mA typ. Input current at full load 24 Vin 3.3 VDC models: 700 mA typ. (at nominal input voltage) other models: 940 mA typ.. 48 Vin 3.3 VDC models: 350 mA typ. other models: 470 mA typ. Start-up voltage 24 V models: 9 VDC (or lower) 48 V models: 18 VDC (or lower) Surge voltage (1 s max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reflected input ripple current 24 Vin models: 50 mAp-p typ. 48 Vin models: 30 mAp-p typ. Conducted noise (input) EN 55032 class A, FCC part 15, level A with ext. components (see application note) ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 4 kV, perf. criteria B Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Recommended input fuse (slow blow) 24 Vin models: 5000 mA 48 Vin models: 2500 mA Output Specifications Voltage set accuracy 1 % Output voltage adj. range 10 % for single output models only For further information see application note www.tracopower.com/overview/thl20wi Regulation Input variation (Vmin Vmax) single output models: 0.2 % max. dual output models: 0.5 % max. Load variation single output models: 0.5 % max. (0 100 % load) dual output models: 1.0 % max. (8 100 % balanced load) Minimum load single output models: not required dual output models: 8 % of rated max current (operation at lower load condition will not damage the converters. However, they may not meet all listed specifications) Ripple and noise (20 MHz bandwidth) 3.3 & 5.0 VDC models: 75 mVp-p typ. 12 & 15 VDC models: 100 mVp-p typ. 24 VDC models: 150 mVp-p typ. Measured with a 1F M/C and a 10F T/C Temperature coefficient 0.02 %/K Output current limitation at 150 % of Iout max., foldback Short circuit protection indefinite, automatic recovery Transient response setting time 300 s typ. (25% load step change) Max. capacitive load 3.3 VDC models: 10300 F 5 VDC models: 6800 F 12 VDC models: 1200 F 15 VDC models: 750 F 24 VDC models: 300 F 12 VDC models: 680 F (each output) 15 VDC models: 380 F (each output)