DC/DC Converters THL 3WI(SM) Series, 3 Watt CB Scheme Features 226037 IEC 60950-1 Compact design in SMD or DIP package Ultra wide 4:1 input voltage range Fully regulated outputs I/O isolation 1500 VDC SMD version qualefi d for leadfree re flow solder process, MSL 2a Operating temp. range 40C to +85C Short circuit protection Remote On/Off control Input filter to meet EN 55022, class A without external components 3-year product warranty The THL 3WI(SM) series is a family of compact 3 W dc/dc-converters with 4:1 input voltage ranges. The product is available in SMD- or DIP-package. The internal lfi ter which meets EN55022 Class A without external components makes the converter easy to design in. They come with remote On/Off and short circuit protection. THL 3WI(SM) converter is an excellent solution for data- and telecom applications and for instrumentation and Industrial electronics. Models Order code Order code Output current Input voltage range Output voltage Efficiency typ. DIP models SMD models max. THL 3-2410WI THL 3-2410WISM 3.3 VDC 600 mA 75 % THL 3-2411WI THL 3-2411WISM 5.0 VDC 600 mA 78 % THL 3-2412WI THL 3-2412WISM 12 VDC 250 mA 80 % THL 3-2413WI THL 3-2413WISM 9 36 VDC 15 VDC 200 mA 80 % THL 3-2415WI THL 3-2415WISM (24 VDC nominal) 24 VDC 125 mA 80 % 5 VDC 300 mA 77 % THL 3-2421WI THL 3-2421WISM THL 3-2422WI THL 3-2422WISM 12 VDC 125 mA 80 % THL 3-2423WI THL 3-2423WISM 15 VDC 100 mA 80 % THL 3-4810WI THL 3-4810WISM 3.3 VDC 600 mA 75 % THL 3-4811WI THL 3-4811WISM 5.0 VDC 600 mA 78 % THL 3-4812WI THL 3-4812WISM 12 VDC 250 mA 80 % THL 3-4813WI THL 3-4813WISM 18 75 VDC 15 VDC 200 mA 80 % THL 3-4815WI THL 3-4815WISM (48 VDC nominal) 24 VDC 125 mA 80 % THL 3-4821WI THL 3-4821WISM 5 VDC 300 mA 77 % THL 3-4822WI THL 3-4822WISM 12 VDC 125 mA 80 % THL 3-4823WI THL 3-4823WISM 15 VDC 100 mA 80 % DC/DC Converters THL 3WI(SM) Series 3 Watt Input Specifications Input current at no load (nominal input voltage) 24 Vin models: 30 mA typ. 48 Vin models: 20 mA typ. Input current at full load (nominal input voltage) 24 Vin 3.3 VDC model: 110 mA typ. 24 Vin other models: 160 mA typ. 48 Vin 3.3 VDC model: 55 mA typ. 48 Vin other models: 80 mA typ. Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 level A, FCC part 15, level A without external components Recommended input fuse (slow blow) 24 V models: 1500 mA 48 V models: 800 mA Output Specifications Voltage set accuracy 2 % max Regulation Input variation Vin min. to Vin max. 1.0 % max. Load variation 15 100 % 1.0 % max. Minimum load 15 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Temperature coefficient 0.02 %/K Ripple and noise (20 MHz bandwidth) 50 mVp-p max. Transient response (25 % load step change) Recovery time 300 s typ. Deviation 3 % Short circuit protection indefinite, automatic recovery Capacitive load 3.3 & 5 VDC models: 220 F max. all other models: 47 F max. General Specifications Temperature Operating (natural convection cooling 20 LFM) 40C to +85C Storage 40C to +125C Case +105C max. Load derating (natural convection cooling 20 LFM) DIP models: 2.5 %/K above +65C SMD 3.3 & 5.0 VDC models: 2.2 %/K above +55C SMD other models: 2.5 %/K above +60C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >300000 h Isolation voltage (60 sec.) Input/Output 1500 VDC Isolation capacitance Input/Output 500 pF max. Isolation resistance Input/Output (500 VDC) >1 GOhm Safety standard (designed to meet) IEC 60950-1, UL 60950-1 Certification documents www.tracopower.com/overview/thl3wism Switching frequency 350 kHz Altitude during operation 5000 m max. (16400 ft) approved Remote On/Off On: 2.5 to 5.5 VDC or open circuit Off: 0.7 to 0.8 VDC Off stand by input current 5 mA max. Environmental compliance Reach www.tracopower.com/products/reach-declaration.pdf RoHS RoHS directive 2011/65/EU All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.