AC/DC Industrial Power Supply TIB 080 Series, 80 Watt Slim profile, for DIN-rail mounting Alternative side-mounting for flat panels High power factor by active power correction Very high efficiency up to 90% Back power immunity 150% peak current for 4 s Operating temperature range: 40C to +70C max. Adjustable output voltage Short circuit and overload protection 3 year product warranty UL 508 UL 60950-1 IEC 60950-1 This generation of DIN-rail power supplies combines the most efficient circuit topology with optimized cost/performance ratio for industrial environments and for electrical control cabinets. They have a very high efficiency of up to 90.0% which allows a very slim package design. The output voltage is adjustable from 2% to +17%. The case offers the potentially useful feature to fix the DIN-rail clip to the side wall for the mounting inside flat panels. Over a period of mini- mum 4 seconds they can operate with a boost power of 150%. The boost pow- er facilitates the activation of stepper motors, solenoids or actuators. The units operate with a high power factor by active power factor correction which also keeps the input inrush current low. The TIB series are also available with higher nominal power of 120, 240 or 480 Watt (+50% boost power). They come with the safety standard approvals for IEC/EN 60950-1, UL 60950-1 and UL 508. Models Order Code Output Power Output Voltage Output Current Output Current Efficiency max. nom. (adjustable) max. peak typ. TIB 080-112 12 VDC (11.8 - 15.0 VDC) 6 700 mA 10 050 mA 88 % TIB 080-124 80 W 24 VDC (23.5 - 28.0 VDC) 3 400 mA 5 100 mA 90 % TIB 080-148 48 VDC (47.0 - 56.0 VDC) 1 700 mA 2 550 mA 90 % Page 1 / 6 www.tracopower.com April 9, 2019TIB 080 Series, 80 Watt Input Specifications Input Voltage 85 - 264 VAC (Full Range) Input Frequency 45 - 65 Hz Power Consumption - at no Load 1 450 mW typ. Input Inrush Current - at 230 VAC 30 A max. - at 115 VAC 15 A max. Power Factor - at 230 VAC 0.48 min. (Active Power Factor Correction) - at 115 VAC 0.48 min. (Active Power Factor Correction) Output Specifications Output Voltage Adjustment 12 VDC model: 11.8 - 15.0 VDC 24 VDC model: 23.5 - 28.0 VDC 48 VDC model: 47.0 - 56.0 VDC By trim potentiometer Output power must no exceed rated power Regulation - Input Variation (Vmin - Vmax) 0.1% max. 0.5% max. - Load Variation (10 - 90%) Output Current peak Peak Power: 105 - 150% of Iout max. Peak Operation Time: 4 s max. (switch off) Off Time: 6 s typ. In peak power mode, the unit continuously switches off the output voltage after 4 s and restarts after approx. 6 s. Ripple and Noise 12 VDC model: 100 mVp-p max. (20 MHz Bandwidth) 24 VDC model: 100 mVp-p max. 48 VDC model: 200 mVp-p max. Capacitive Load Infinite Minimum Load not required Temperature Coefficient 0.02 %/K max. Hold-up Time - at 230 VAC 160 ms min. - at 115 VAC 20 ms min. Start-up Time - at 230 VAC 2 000 ms max. - at 115 VAC 2 000 ms max. Overload Protection CC-Mode Output Current Limitation 155% min. of Iout max. Short Circuit Protection Switch off after 4 s delay, automatic restart Overvoltage Protection 117 - 158% of Vout nom. (depending on model) 16 - 19 VDC (12 VDC model) 32 - 35 VDC (24 VDC model) 56 - 60 VDC (48 VDC model) (In case of an internal error a second voltage reg- ulation loop keeps the output voltage at a save level, the power supply turnes off and tries to restart after 6 s.) Transient Response - Peak Variation 600 mV max. (10% to 90% Load Step) - Response Time 2500 s typ. (10% to 90% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment IEC 60950-1 EN 60950-1 UL 60950-1 CSA-C22.2, 60950-1-07 - Industrial Control Equipment UL 508 www.tracopower.com/overview/tib080 - Certification Documents Protection Class Class I Prepared: Connection to PE All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 6 www.tracopower.com April 9, 2019