TIW 12-112 TRACO Power

AC/DC Power Supplies TIW Series, 4 24 Watt M M CB Scheme Features High efcfi iency switching power supplies Easy installation into standard flush boxes Fully encapsulated plastic housing Dust and waterproof to IP 67 Protection class ll Safety approval to IEC/EN 60950-1 EN 50178, EN 60335-1, UL 1310 class 2 Approved for mounting onto wood or materials with unknown flammability Ready to meet ErP directive Universal input range 93 to 264 VAC Regulated output voltage (models from 3.3 to 24 VDC) Operating temp. range 25C to +50C Short circuit and overload protection 3-year product warranty The TIW series is a new range of small size DC-power supplies which have been designed particularly for applications in home and ofcfi e installations. The compact modules cases t fi in the standardized in-wall ufl sh boxes or also can be mounted on walls. For connection there are models available with flying wires The power supplies comply fully with the safety and EMC standards requested for commercial and residential class ll installations. Typical applications are powering of electric devices used in home automation and in security systems like i.e. DC-motors, controllers, indicators, etc. (Mounted in standard flush box) Models Order Code Output Power max. Output Voltage Output Current Efficiency TIW 06-103 4 W 3.3 VDC 1.2 A 75 % TIW 06-105 5 W 5.0 VDC 1.0 A 75 % TIW 06-106 6 W 6.0 VDC 1.0 A 80 % TIW 12-112 12 W* 12 VDC 1.0 A 80 % TIW 12-115 12 W* 0.8 A 80 % 15 VDC TIW 12-124 12 W* 24 VDC 0.5 A 80 % TIW 24-112 24 W* 12 VDC 2.0 A 83 % 1.0 A 85 % TIW 24-124 24 W* 24 VDC * If these models are used with 115 VAC input voltage, a 25% load reduction must be applied. AC/DC Power Supplies TIW Series 4 24 Watt Input Specifications Input voltage range nominal 115 230 VAC ranges 93 264 VAC (universal input) output power derating for 12 & 24 W models 0.45 %/V below 187 VAC down to 132 VAC 1 %/V below 115 VAC Input frequency 47 63 Hz No load power consumption (acc. ErP directive EC No.278/2009) < 300 mW External input fuse required (recommended values) 2 to 6 A slow blow resp. characteristic C Harmonic limits EN 61000-3-2, Class A Output Specifications Voltage set accuracy 3 % max. Regulation Input variation 1 % max. Load variation (0100%) 2 % max. Ripple and noise (20 Mhz Bandwidth) <200 mVp-p Start-up time <1s Hold-up time Vin = 115 VAC 5 ms typ. Vin = 230 VAC 20 ms typ. Overload protection by current limit TIW 06-xxx & TIW 24-xxx models: <2.5 A TIW 12-xxx models: <3.5 A Short circuit protection foldback (automatic recovery) General Specifications Operating Temperature (Ambient) 25C to +50C Please take heat sources (such as lamps) nearby into consideration for ambient temperature of the power supply Over temperature protection built in (for safety reason only) Preventive fire protection VDE 710-14 Protection class class II as per IEC/EN 61140 Safety standards CB test certificate IT safety IEC 60950-1:2005(2nd)+A1:2009+A2:2013, EN 60950-1:2006+A1:2010+A2:2013+ A11:2009+A12:2011 BV certificate household appliance IEC/EN 60335-1, VDE 710-14 safety of transformers IEC/EN 61558-2-16, IEC/EN 61558-2-8 used in conjunction with IEC/EN 61558-1 lamp controlgear IEC/EN 61347-2-13 used in conjunction with IEC/EN 61347-1 electronic equipment for power installation IEC 62103 (1st Ed.), EN 50178:1997 CSA certificate of compliance IT safety UL 60950-1(2nd Ed.)+Am1:2011, CAN/CSA-C22.2 No.60950-1-07+Am1:201 class 2 power units UL 1310 (6th Edition), CAN/CSA-C22.2 No.223-M91(R2008) Certification documents www.tracopower.com/overview/tiw Electromagnetic compatibility (EMC), emissions EN 61000-6-3 Conducted RI suppression on input EN 55022 class B, EN 55014-1 Radiated RI suppression EN 55022 class B, EN 55014-1 Electromagnetic compatibility (EMC), immunity EN 61000-6-2-1, IEC 61204-3 Electrostatic discharge (ESD) EN 61000-4-2 4 kV / 8 kV, class B Radiated RF field immunity EN 61000-4-3 10 V/m, class A Electrical fast transient / burst immunity EN 61000-4-4 2 kV / 0.5 kV, class B+A Surge immunity see next page All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.