TMA 1205D TRACO Power

DC/DC Converter TMA Series, 1 Watt Industry standard pinout Non-regulated output Single and dual output models I/O isolation voltage 1000VDC High efficiency The TMA series are miniature, isolated 1 W DC/DC-converters in a Sin- Operating temperature range 40 C to gle-in-Line package (SIP). Requiring only 1.2 cm2 board space they offer the +85 C ideal solution in many space critical applications for board level power distribu- tion. The use of SMD technology makes it possible to offer a product with high performance at low cost. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TMA 0505S 5 VDC 200 mA 71 % TMA 0512S 12 VDC 84 mA 78 % 4.5 - 5.5 VDC TMA 0515S 15 VDC 67 mA 78 % (5 VDC nom.) TMA 0505D +5 VDC 100 mA 5 VDC 100 mA 72 % TMA 0512D +12 VDC 42 mA 12 VDC 42 mA 78 % TMA 0515D +15 VDC 34 mA 15 VDC 34 mA 79 % TMA 1205S 5 VDC 200 mA 73 % TMA 1212S 12 VDC 84 mA 80 % TMA 1215S 10.8 - 13.2 VDC 15 VDC 67 mA 80 % (12 VDC nom.) TMA 1205D +5 VDC 100 mA 5 VDC 100 mA 74 % TMA 1212D +12 VDC 42 mA 12 VDC 42 mA 81 % TMA 1215D +15 VDC 34 mA 15 VDC 34 mA 81 % TMA 1505S 5 VDC 200 mA 72 % TMA 1512S 12 VDC 84 mA 79 % TMA 1515S 13.5 - 16.5 VDC 15 VDC 67 mA 79 % (15 VDC nom.) TMA 1505D +5 VDC 100 mA 5 VDC 100 mA 72 % TMA 1512D +12 VDC 42 mA 12 VDC 42 mA 80 % TMA 1515D +15 VDC 34 mA 15 VDC 34 mA 80 % TMA 2405S 5 VDC 200 mA 71 % TMA 2412S 12 VDC 84 mA 78 % 21.6 - 26.4 VDC 15 VDC 67 mA 79 % TMA 2415S (24 VDC nom.) TMA 2405D +5 VDC 100 mA 5 VDC 100 mA 72 % TMA 2412D +12 VDC 42 mA 12 VDC 42 mA 79 % TMA 2415D +15 VDC 34 mA 15 VDC 34 mA 80 % Page 1 / 4 www.tracopower.com January 7, 2022TMA Series, 1 Watt Input Specifications Input Current - At no load 5 Vin models: 30 mA typ. 12 Vin models: 12 mA typ. 15 Vin models: 11 mA typ. 24 Vin models: 7 mA typ. - At full load 5 Vin models: 270 mA typ. 12 Vin models: 110 mA typ. 15 Vin models: 90 mA typ. 24 Vin models: 55 mA typ. Surge Voltage 5 Vin models: 9 VDC max. (1 s max.) 12 Vin models: 18 VDC max. (1 s max.) 15 Vin models: 18 VDC max. (1 s max.) 24 Vin models: 30 VDC max. (1 s max.) Recommended Input Fuse (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Output Specifications Voltage Set Accuracy 3% max. Regulation - Input Variation (Vmin - Vmax) single output models: 1.5% max. dual output models: 1.5% max. - Load Variation (20 - 100%) single output models: 10% max. dual output models: 10% max. (Output 1) 10% max. (Output 2) - Voltage Balance dual output models: 1% max. (symmetrical load) Ripple and Noise - 20 MHz Bandwidth 50 mVp-p typ. 75 mVp-p max. Capacitive Load - single output 5 Vout models: 220 F max. 12 Vout models: 220 F max. 15 Vout models: 220 F max. - dual output 5 / -5 Vout models: 100 / 100 F max. 12 / -12 Vout models: 100 / 100 F max. 15 / -15 Vout models: 100 / 100 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Short Circuit Protection Limited 0.5 s max., Automatic recovery Safety Specifications Safety Standards - IT / Multimedia Equipment Designed for EN 62368-1 (no certification) General Specifications Relative Humidity 95% max. (non condensing) Temperature Ranges - Operating Temperature 40C to +85C - Case Temperature +105C max. - Storage Temperature 50C to +125C Power Derating - High Temperature 4 %/K above 75C (5 & 5 Vout models) 4 %/K above 80C (other models) Cooling System Natural convection (20 LFM) Switching Frequency 70 - 120 kHz (PFM) 100 kHz typ. (PFM) Insulation System Functional Insulation Isolation Test Voltage - Input to Output, 60 s 1 000 VDC Isolation Resistance - Input to Output, 500 VDC 1 000 M min. All specifications valid at nominal voltage, resistive full load and +25C after warm-up time, unless otherwise stated. Page 2 / 4 www.tracopower.com January 7, 2022