AC/DC Power Modules TML 100C Series, 85-100 Watt CB UL 60950-1 Scheme Features Very compact power modules with screw terminal connection Active PFC, power factor >0.95 (230VAC), >0.99 (115 VAC) High efcfi iency up to 93% typ. Remote On/Off input Adjustable output voltage 5% LED output indicator Universal input 100-240 VAC nominal Low leakage current EMI meets EN 55032, class B Protection class ll prepared The TML 100C series modules are very compact 85100 Watt power supplies in a fully encapsulated plastic case. Active power factor correction and high efcfi iency across full load range qualify these modules for installation in energy related prod- ucts. They feature screw terminals for easy installation. The TML 100C series is accompanied by an international safety approval package for worldwide markets. Models Output power Output current Order code Output voltage Efficiency max. max. TML 100-112C 85 12 VDC 7080 mA 90 % TML 100-115C 85 15 VDC 5660 mA 90 % TML 100-124C 100 24 VDC 4200 mA 92 % TML 100-148C 100 48 VDC 2100 mA 93 % Full TML and TMLM Series Model Range Series Description Datasheet TMLM 04 4 Watt, PCB mount, single and dual output models TMLM 05 5 Watt, PCB mount, single output models www.tracopower.com/products/tmlm.pdf TMLM 10 10 Watt, PCB mount, single output models TMLM 20 20 Watt, PCB mount, single output models (compact design) TML 20 20 Watt, PCB & chassis mount, single, dual and triple output models www.tracopower.com/products/tml.pdf TML 40 40 Watt, PCB & chassis mount, single, dual and triple output models www.tracopower.com Page 1 of 3AC/DC Power Modules TML 100C Series 85-100 Watt Input Specifications Input voltage ranges nominal 100 240 VAC (universal input) AC full range 90 264 VAC DC Input 120 370 VDC Input frequency 47 63 Hz Input current at full load (115 VAC / 230 VAC nominal input) < 2.0 A / < 1.0 A max. Leakage current 0.5 mA max. Harmonic limits EN 61000-3-2, Class A Power factor >0.99 at 115 VAC, >0.95 at 230 VAC Output Specifications Voltage set accuracy 2 % Output voltage adjustment range 5% (see page 3) Minimum load 3% of rated max current (operation at lower load condition is safe but a higher output ripple will be experianced) Ripple and noise (20 MHz bandwidth) 12 VDC model: 120 mV max. 15 VDC model: 150 mV max. 24 VDC model: 200 mV max. 48 VDC model: 240 mV max. Regulation input variation 1% load variation 1% Current limitation 105% 180% of rated output power. (automatic recovery) Overvoltage protection by Zener diode Short circuit protection indefinite (hiccup, automatic recovery) Hold-up time 10 ms min. (110VAC) Max. capacitive load 12 VDC model: 50000 F 15 VDC model: 40000 F 24 VDC model: 6000 F 48 VDC model: 560 F General Specifications Temperature ranges Operating 25C to +70C Power derating above +50C 3.75 %/K Case max. +95C Storage (non operating) 25C to +85C Temperature coefficient 0.03 %/K Efficiency see model table Remote On/Off control On: open or connection to -Vout Off: external +5VDC Humidity (non condensing) 95 % rel max. Altitude during operation 2000 m max. Switching frequency (pulse width modulation PWM) 100133 kHz Isolation voltage Input/Output 3000 VAC Working voltage (rated) 286 VAC Reliability /calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >250000 h Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS RoHS directive 2011/65/EU All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. www.tracopower.com Page 2 of 3