AC/DC Power Supply TMPS 10 Series, 10 Watt Ultra Compact 10 Watt PCB Power module in 1 x 1.5 package Certified to IEC/EN 60335-1 and UL 62368-1 for household and industrial appliance Reinforced I/O isolation 4000 VAC Operating temperature range 25C to +70C Allows 130% peak current up to 30 s Ready to meet ErP directive, < 0.15 W no load power consumption EMI meets EN 55032 class B and EN 55014-1 UL 62368-1 IEC 60335-1 Protection class II prepared IEC 62368-1 3-year product warranty The TMPS 10 series comprises ultra compact AC/DC power supply modules in a lightweight fully encapsulated plastic casing for PCB mount. Beside the latest safety approvals for industrial and IT solutions (IEC/EN/UL 62368-1), they are also certified to IEC/EN 60335-1 for household appliance. These 10 Watt modules are the ideal solution for low power or segregated circuits when space is critical or for an efficient powering of a standby mode when compliance to ErP directive is required. A peak current of 130% facilitates the activation of main circuits. Models Order Code Output Power Output Voltage Output Current Output Current Efficiency max. nom. max. peak typ. TMPS 10-103 8.6 W 3.3 VDC 2 600 mA 3 380 mA 77 % TMPS 10-105 5 VDC 2 000 mA 2 600 mA 80 % TMPS 10-109 9 VDC 1 100 mA 1 440 mA 83 % TMPS 10-112 12 VDC 830 mA 1 080 mA 84 % 10 W 15 VDC 660 mA 860 mA 84 % TMPS 10-115 TMPS 10-124 24 VDC 410 mA 530 mA 86 % TMPS 10-148 48 VDC 210 mA 270 mA 84 % Page 1 / 4 www.tracopower.com December 10, 2021TMPS 10 Series, 10 Watt Input Specifications Input Voltage - AC Range Operational Range: 85 - 264 VAC (Full Range) Rated Range: 100 - 240 VAC (Full Range) - DC Range Operational Range: 120 - 370 VDC (Designed for, no certification) Polarity: irrelevant Input Frequency 47 - 63 Hz (designed to meet: 47 - 440 Hz) Power Consumption - At no load 150 mW max. (Ready to meet ErP directive) Input Inrush Current - At 230 VAC 40 A max. - At 115 VAC 20 A max. Recommended Input Fuse 1 600 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Output Specifications Voltage Set Accuracy 2% max. Regulation - Input Variation (Vmin - Vmax) 0.5% max. - Load Variation (0 - 100%) 1% max. Boost Power Output Current peak: See model table Peak power time: 30 s max. Peak power duty cycle: 10% max. Average operation power: 10 W max. Ripple and Noise 3.3 VDC model: 60 mVp-p max. (20 MHz Bandwidth) 5 VDC model: 60 mVp-p max. 9 VDC model: 90 mVp-p max. 12 VDC model: 120 mVp-p max. 15 VDC model: 150 mVp-p max. 24 VDC model: 240 mVp-p max. 48 VDC model: 480 mVp-p max. Capacitive Load 3.3 VDC model: 4 400 F max. 5 VDC model: 2 200 F max. 9 VDC model: 680 F max. 12 VDC model: 390 F max. 15 VDC model: 240 F max. 24 VDC model: 100 F max. 48 VDC model: 24 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Hold-up Time - At 230 VAC 40 ms min. - At 115 VAC 8 ms min. Short Circuit Protection Continuous, Automatic recovery Overload Protection Foldback Mode Output Current Limitation 150% typ. of Iout max. Overvoltage Protection 125% typ. of Vout nom. (By Zener diode) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 62368-1 IEC 62368-1 UL 62368-1 - Household EN 60335-1 IEC 60335-1 - Certification Documents www.tracopower.com/overview/tmps10 Protection Class Class I & II (Prepared): Reinforced Insulation Pollution Degree PD 2 Over Voltage Category OVC II All specifications valid at nominal voltage, resistive full load and +25C after warm-up time, unless otherwise stated. Page 2 / 4 www.tracopower.com December 10, 2021