TMR 2-4813WISM TRACO Power

DC/DC Converter TMR 2WISM Series, 2 Watt Ultra wide 4:1 Input: 4.512, 936 and 1875 VDC I/O-isolation 1500 VDC Fully regulated outputs Operating temperature range 40C to +80C UL 62368-1 IEC 62368-1 Protection against short circuit and overload The TMR 2WISM Series is a set of 2 Watt SMD DC/DC converters. They operate up to 70C environment temperature at full load or up to 80C with a 50% load Remote On/Off derating. With UL 60950-1 certification, 1500 VDC I/O-isolation voltage,exter- nal On/Off and short current protection they cover a wide range of application 3-year product warranty when space is limited. The input of the converters is designed for a wide volt- age range (4:1) and minimum load is not required. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TMR 2-0511WISM 5 VDC 400 mA 80 % TMR 2-0512WISM 12 VDC 167 mA 84 % TMR 2-0513WISM 4.5 - 12 VDC 15 VDC 134 mA 83 % (9 VDC nom.) TMR 2-0515WISM 24 VDC 83 mA 84 % TMR 2-0522WISM +12 VDC 83 mA 12 VDC 83 mA 83 % TMR 2-0523WISM +15 VDC 67 mA 15 VDC 67 mA 82 % TMR 2-2411WISM 5 VDC 400 mA 80 % TMR 2-2412WISM 12 VDC 167 mA 84 % 9 - 36 VDC TMR 2-2413WISM 15 VDC 134 mA 85 % (24 VDC nom.) TMR 2-2415WISM 24 VDC 83 mA 85 % TMR 2-2422WISM +12 VDC 83 mA 12 VDC 83 mA 83 % TMR 2-2423WISM +15 VDC 67 mA 15 VDC 67 mA 83 % TMR 2-4811WISM 5 VDC 400 mA 78 % TMR 2-4812WISM 12 VDC 167 mA 82 % TMR 2-4813WISM 18 - 75 VDC 15 VDC 134 mA 83 % (48 VDC nom.) TMR 2-4815WISM 24 VDC 83 mA 84 % TMR 2-4822WISM +12 VDC 83 mA 12 VDC 83 mA 82 % TMR 2-4823WISM +15 VDC 67 mA 15 VDC 67 mA 82 % Page 1 / 4 www.tracopower.com September 30, 2021TMR 2WISM Series, 2 Watt Input Specifications Input Current - At no load 9 Vin models: 40 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. - At full load 9 Vin models: 490 mA typ. 24 Vin models: 100 mA typ. 48 Vin models: 50 mA typ. Surge Voltage 9 Vin models: 15 VDC max. (1 s max.) 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Recommended Input Fuse (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Pi-Type Short Circuit Input Power 1.5 W max. Output Specifications Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.5% max. dual output models: 0.5% max. - Load Variation (0 - 100%) single output models: 1% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) - Voltage Balance dual output models: 2% max. (symmetrical load) - Cross Regulation dual output models: 5% max. (25% / 100% asym. load) Ripple and Noise - 20 MHz Bandwidth 50 mVp-p max. Capacitive Load - single output 5 Vout models: 1 680 F max. 12 Vout models: 820 F max. 15 Vout models: 680 F max. 24 Vout models: 390 F max. - dual output 12 / -12 Vout models: 470 / 470 F max. 15 / -15 Vout models: 330 / 330 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Start-up Time 30 ms max. Short Circuit Protection Automatic recovery Overload Protection Foldback Mode Output Current Limitation 160% typ. of Iout max. Transient Response - Response Deviation 5% max. (25% Load Step) - Response Time 250 s typ. (25% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/tmr2wism - Certification Documents Pollution Degree PD 3 EMC Specifications EMI Emissions - Conducted Emissions EN 55032 class A (internal filter) FCC Part 15 class A (internal filter) - Radiated Emissions EN 55032 class A (internal filter) FCC Part 15 class A (internal filter) All specifications valid at nominal voltage, resistive full load and +25C after warm-up time, unless otherwise stated. Page 2 / 4 www.tracopower.com September 30, 2021