TMR 3-4822WIE TRACO Power

DC/DC Converter TMR 3WIE Series, 3 Watt Wide 4:1 input voltage range Compact SIP-8 package Cost optimized design Temperature range 40C to +85C I/O isolation 1600 VDC UL 62368-1 IEC 62368-1 Remote On/Off control The TMR 3WIE series is a family of isolated 3 W DC/DC converter modules with 3-year product warranty regulated output, featuring wide 4:1 input voltage ranges. The product comes in a compact SIP-8 plastic package with small footprint occupying only 2.0 cm (0.3 square inch) of board space. An excellent efficiency allows 40C to +85C operation temperature. Further features include remote On/Off control and continuous short circuit protection. The compact dimensions and cost optimized design make this converters an ideal solution for applications in communication equipment, instrumentation and industrial electronics. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TMR 3-1210WIE 3.3 VDC 700 mA 74 % TMR 3-1211WIE 5 VDC 600 mA 78 % TMR 3-1212WIE 12 VDC 250 mA 80 % 4.5 - 18 VDC TMR 3-1213WIE 15 VDC 200 mA 80 % (12 VDC nom.) TMR 3-1221WIE +5 VDC 300 mA 5 VDC 300 mA 80 % TMR 3-1222WIE +12 VDC 125 mA 12 VDC 125 mA 80 % TMR 3-1223WIE +15 VDC 100 mA 15 VDC 100 mA 80 % TMR 3-2410WIE 3.3 VDC 700 mA 75 % TMR 3-2411WIE 5 VDC 600 mA 80 % TMR 3-2412WIE 12 VDC 250 mA 81 % 9 - 36 VDC TMR 3-2413WIE 15 VDC 200 mA 81 % (24 VDC nom.) TMR 3-2421WIE +5 VDC 300 mA 5 VDC 300 mA 79 % TMR 3-2422WIE +12 VDC 125 mA 12 VDC 125 mA 80 % TMR 3-2423WIE +15 VDC 100 mA 15 VDC 100 mA 81 % TMR 3-4810WIE 3.3 VDC 700 mA 74 % TMR 3-4811WIE 5 VDC 600 mA 79 % TMR 3-4812WIE 12 VDC 250 mA 79 % 18 - 75 VDC TMR 3-4813WIE 15 VDC 200 mA 79 % (48 VDC nom.) TMR 3-4821WIE +5 VDC 300 mA 5 VDC 300 mA 79 % TMR 3-4822WIE +12 VDC 125 mA 12 VDC 125 mA 79 % TMR 3-4823WIE +15 VDC 100 mA 15 VDC 100 mA 80 % Page 1 / 4 www.tracopower.com August 27, 2021TMR 3WIE Series, 3 Watt Input Specifications Input Current - At no load 12 Vin models: 60 mA typ. 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. - At full load 12 Vin models: 300 mA typ. 24 Vin models: 150 mA typ. 48 Vin models: 75 mA typ. Surge Voltage 12 Vin models: 25 VDC max. (1 s max.) 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Under Voltage Lockout 12 Vin models: 4 VDC max. 24 Vin models: 8 VDC max. 48 Vin models: 16 VDC max. Recommended Input Fuse 12 Vin models: 1 500 mA (slow blow) 24 Vin models: 700 mA (slow blow) 48 Vin models: 350 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Short Circuit Input Power 2.5 W max. Output Specifications Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.5% max. dual output models: 0.5% max. - Load Variation (25 - 100%) single output models: 1% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) - Voltage Balance dual output models: 2% max. (symmetrical load) Ripple and Noise - 20 MHz Bandwidth 75 mVp-p max. Capacitive Load - single output 3.3 Vout models: 1 760 F max. 5 Vout models: 1 000 F max. 12 Vout models: 170 F max. 15 Vout models: 110 F max. - dual output 5 / -5 Vout models: 470 / 470 F max. 12 / -12 Vout models: 100 / 100 F max. 15 / -15 Vout models: 47 / 47 F max. Minimum Load 25 % of Iout max. (Operation at lower load condition is safe but a higher output ripple will be experienced) Temperature Coefficient 0.02 %/K max. Short Circuit Protection Automatic recovery Overload Protection Foldback Mode Output Current Limitation 110% min. of Iout max. 140% typ. of Iout max. Transient Response - Response Deviation 5% max. (25% Load Step) - Response Time 300 s typ. / 500 s max. (25% Load Step) All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com August 27, 2021