TMR 6-4821WI TRACO Power

DC/DC Converter TMR 6WI Series, 6 Watt Highest power density in SIP package Wide 4:1 input voltage range Ultra-compact SIP-8 package Smallest footprint 6 W converter Temperature range 40 to +84C UL 62368-1 IEC 62368-1 High efficiency up to 88% The TMR 6WI series is a new family of isolated 6 W DC/DC converter modules Indefinite short-circuit protection with regulated output, featuring wide 4:1 input voltage ranges. The product I/O isolation 1600 VDC comes in a ultra-compact SIP-8 plastic package with a small footprint occupy- ing only 2.0 cm (0.3 square inch) of board space. Remote On/Off control An excellent efficiency allows 40 to +84C operation temperatures. Further 3-year product warrenty features include remote On/Off control and continuous short circuit protection. The very compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumenta- tion and industrial electronics. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TMR 6-2410WI 3.3 VDC 1 500 mA 81 % TMR 6-2411WI 5 VDC 1 200 mA 84 % TMR 6-2419WI 9 VDC 666 mA 86 % TMR 6-2412WI 12 VDC 500 mA 87 % 9 - 36 VDC TMR 6-2413WI 15 VDC 400 mA 88 % (24 VDC nom.) TMR 6-2415WI 24 VDC 250 mA 87 % TMR 6-2421WI +5 VDC 600 mA 5 VDC 600 mA 84 % TMR 6-2422WI +12 VDC 250 mA 12 VDC 250 mA 87 % TMR 6-2423WI +15 VDC 200 mA 15 VDC 200 mA 87 % TMR 6-4810WI 3.3 VDC 1 500 mA 81 % TMR 6-4811WI 5 VDC 1 200 mA 84 % TMR 6-4819WI 9 VDC 666 mA 85 % TMR 6-4812WI 12 VDC 500 mA 87 % 18 - 75 VDC TMR 6-4813WI 15 VDC 400 mA 87 % (48 VDC nom.) TMR 6-4815WI 24 VDC 250 mA 87 % TMR 6-4821WI +5 VDC 600 mA 5 VDC 600 mA 84 % TMR 6-4822WI +12 VDC 250 mA 12 VDC 250 mA 87 % TMR 6-4823WI +15 VDC 200 mA 15 VDC 200 mA 87 % Page 1 / 4 www.tracopower.com September 17, 2021TMR 6WI Series, 6 Watt Input Specifications Input Current - At no load 24 Vin models: 6 mA typ. 48 Vin models: 6 mA typ. Surge Voltage 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Recommended Input Fuse 24 Vin models: 1 600 mA (slow blow) 48 Vin models: 1 000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Output Specifications Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.2% max. - Load Variation (0 - 100%) single output models: 0.5% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) - Cross Regulation dual output models: 5% max. (25% / 100% asym. load) Ripple and Noise - single output 3.3 Vout models: 50 mVp-p max. (20 MHz Bandwidth) 5 Vout models: 50 mVp-p max. 9 Vout models: 50 mVp-p max. 12 Vout models: 75 mVp-p max. 15 Vout models: 75 mVp-p max. 24 Vout models: 75 mVp-p max. - dual output 5 / -5 Vout models: 50 / 50 mVp-p max. 12 / -12 Vout models: 75 / 75 mVp-p max. 15 / -15 Vout models: 75 / 75 mVp-p max. Capacitive Load - single output 3.3 Vout models: 2 200 F max. 5 Vout models: 1 100 F max. 9 Vout models: 680 F max. 12 Vout models: 470 F max. 15 Vout models: 470 F max. 24 Vout models: 180 F max. - dual output 5 / -5 Vout models: 680 / 680 F max. 12 / -12 Vout models: 330 / 330 F max. 15 / -15 Vout models: 180 / 180 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Start-up Time 30 ms typ. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 180% typ. of Iout max. Transient Response - Response Time 250 s typ. (25% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 62368-1 IEC 62368-1 UL 62368-1 - Certification Documents www.tracopower.com/overview/tmr6wi Pollution Degree PD 2 Over Voltage Category OVC I All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com September 17, 2021