TMSB 2-2143 TRACO Power

AC/DC Power Modules TMSB 2 Series, 2 Watt CB Scheme LVD UL 60950-1 Features Standby power module to comply with ErP directive No load input power < 150mW Constant power characteristics at 2W (no current limitation) Suitable to drive relays, selenoids, capacitive loads and LEDs Constant voltage auxiliary outputs 3.3 and 5 VDC Operating temperature range 30C to +70C EMI meets EN 55022, class B and FCC, level B Short circuit and overload protection 3-year product warranty The TMSB-2 series are compact AC/DC power supplies in a fully encapsulated plastic casing with solder pins for direct PCB mounting. They feature regulated outputs and constant power characteristics which make them suitable to drive relays, solenoids, LEDs and capacitive loads. Models with an additional regulated auxiliary output can be used to power a logic circuit in standby functions. An universal input voltage 85264 VAC, safety approvals including approvals for household applications (EN 60335-1) and an operating temp. range from 30C to +70C qualify them for worldwide markets. Models Order code Output power max. Output 1 Output 2 Efficiency TMSB 2-108 8.0 VDC / 250 mA 72 % TMSB 2-114 14 VDC / 143 mA 74 % TMSB 2-124 24 VDC / 83 mA 76 % 1) 1) TMSB 2-283 8.0 VDC / 250 mA 3.3 VDC / 160 mA 69 % 2 W 1) 1) TMSB 2-285 8.0 VDC / 250 mA 5.0 VDC / 250 mA 69 % 2) 2) TMSB 2-2143 14 VDC / 143 mA 3.3 VDC / 70 mA 70 % 2) 2) TMSB 2-2145 14 VDC / 143mA 5.0 VDC / 83 mA 70 % 1) Iout1 + Iout2 = 250 mA max. 2) Iout1 + Iout2 = 143 mA max. AC/DC Power Modules TMSB 2 Series 2 Watt Input Specifications Input voltage ranges AC input 85 264 VAC DC Input 120 370 VDC Input frequency 47 440 Hz Input current at full load 41 mA typ. No-Load power consumption <150 mW External fuse (required) 3.15 A slow blow type (recommendation) Input surge voltage 305 VAC max. Output Specifications Voltage set accuracy Output 1: 5 % max. Output 2: 2 % max. Minimum load no minimum load required Ripple and noise (20 MHz bandwidth) Output 1: 1 Vp-p typ. Output 2: 0.1 Vp-p typ. Regulation Input variation Output 1: 1 % typ. Output 2: 0.3 % typ. Regulation Load variation (10 100%) Output 1: 1 % typ. Output 2: 0.5 % typ. Short circuit protection continuous, automatic recovery General Specifications Temperature ranges Operating 30C to +70C Power derating 2.0 %/K above +60C Storage (non operating) 40C to +85C Temperature coefficient 0.02 %/C Humidity (non condensing) 95 % rel max. Switching frequency (pulse width modulation PWM) 45 kHz typ. Isolation voltage Input/Output 4242 VAC Reliability /calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >500000 h Electromagnetic compatibilit y Conducted input RI suppression: EN 55022, class B, FCC part 15, level B (EMC), emissions Radiated input suppression: EN 55014-1 Electromagnets compatibility Electrostatic discharge ESD IEC / EN 61000-4-2, criteria A (EMC), immunity RF field immunity IEC / EN 61000-4-3, criteria A Electrical fast transients/burst immunity IEC / EN 61000-4-4, criteria A Surge IEC / EN 61000-4-5, criteria A Conducted RF IEC / EN 61000-4-6, criteria A Voltage dip IEC / EN 61000-4-11 Protection class II Acording IEC/EN 60536 Safety standards IEC/EN 60950-1 (ed. 2) AM 1, UL 60950-1, CSA C22.2 No. 60950-1-07 EN 60335-1:2010 Certification documents www.tracopower.com/overview/tmsb2 Casing material plastic resin + fiberglass (UL 94V-0 rated) Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS RoHS directive 2011/65/EU All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.