TMV 1215 EN TRACO Power

DC/DC Converters TMV-EN Series, 1 Watt Features I/O isolation voltage 3000 VACrms UL 60950-1 Reinforced insulation, rated for 300 VAC working voltage Unregulated device Certiefi d to IEC/EN/UL 60950-1 safety standards Safety barrier 100 % production test Low coupling capacity Single-in-line package (SIP) Lead-free design, RoHS compliant 3-year product warranty The TMV-EN series is a range of 1 Watt non-regulated DC/DC converters with high I/O-isolation. This product features an isolation barrier which is approved for supplementary an reinforced insulation. SMD construction and a special designed toroidal transformer made it possible to built these converters in a standard SIP package with a very small footprint. These features making the TMV-EN series an economical solution in many DC/DC converter applications requiring safety agency approval. Models Order code Input voltage Output voltage Output current max. Efficiency typ. TMV 0505 EN 5 VDC 200 mA 66 % TMV 0512 EN 12 VDC 80 mA 66 % TMV 0515 EN 5 VDC 10 % 15 VDC 65 mA 66 % TMV 0505D EN 5 VDC 100 mA 66 % TMV 0512D EN 12 VDC 40 mA 72 % TMV 0515D EN 15 VDC 35 mA 73 % TMV 1205 EN 5 VDC 200 mA 66 % TMV 1212 EN 12 VDC 80 mA 66 % TMV 1215 EN 12 VDC 10 % 15 VDC 65 mA 66 % TMV 1205D EN 5 VDC 100 mA 66 % TMV 1212D EN 12 VDC 40 mA 74 % TMV 1215D EN 15 VDC 35 mA 75 % DC/DC Converters TMV-EN Series 1 Watt Input Specifications Input current no load / full load 5 Vin models: 55 mA / 285 mA typ. 12 Vin models: 30 mA / 115 mA typ. Surge voltage (1 s max.) 5 Vin models: 9 V max. 12 Vin models: 29 V max. Reflected input ripple current can be reduced by ext. 13.3 F polyester film capacitor Input filter internal capacitor Input fuse recommended, required for compliance with CB recommended fuse rating 5 V models: 500 mA 12 V models: 200 mA Output Specifications Voltage set accuracy 1 % typ. / 3 % max. Voltage balance (dual output models, balanced loads) 0.1 % typ. / 1 % max. Regulation Input variation (1 % change of Vin) 1.2 % typ. / 1.5 % max. Load variation (20 100 %) <10 % Ripple and noise (20 MHz Bandwidth) 100 mVp-p typ. / 150 mVp-p max. Temperature coefficient 0.01 %/K typ. / 0.02 %/K max. Short circuit protection limited 0.5 s max. Capacitive load single output models: 680 F max. dual output models: 220 F max. (each output) Isolation /Safety Isolation voltage Isolation test voltage (tested for 1 s) 6000 Vpk I/O isolation voltage (60 s) 3000 VAC Rated max. working voltage 300 VAC / 640 Vpk Isolation capacitance (input/output) 15 pF typ. / 20 pF max. Isolation resistance (input/output) >10 GOhm Safety standards IEC 60950-1:2005 +A1:2009 EN 60950-1:2006 +A1:2010 +A11:2009 +A12:2011 UL 60950-1, CSA C22.2 No. 60950-1-03 Certification documents www.tracopower.com/overview/tmv-en General Specifications Temperature ranges Operating 25C to +85C Max. ambient approved IEC/UL 60950-1 +70C Case temperature +105 C max. Storage temperature 50C to +125C Derating 2.85 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F at +25C, ground benign) >2000000 h Switching frequency 50 to 100 kHz (frequency modulation) Altitude during operation 5000m max. approved Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS RoHS directive 2011/65/EU All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.