TON 15-2410 TRACO Power

DC/DC Converters TON 15 Series, 15 Watt CB Features Scheme UL 60950-1 Ultra compact 15W converter Cost efcfi ient open frame design with industry standard pin-out Surface-mount (SM) and through-hole version I/O isolation voltage 2250V, rated for basic insulation Extended operating temperature range 40C to +85C Remote On/Off Under voltage lockout Lead free design, RoHS compliant 3-years product warranty The TON-15 series is a new generation of high performance 15W dc-dc convert- ers with wide input voltage range and precisely regulated output voltage. The ultra compact open frame design with industry standard pin-out provides the designer now a 50% smaller, cost efcfi ient alternative to existing 10 to 15W converters in the market. Built-in lfi ters for both input and output minimize the need for external ltfi ering. Further features include remote On/Off, output voltage trimming, over voltage protection and short circuit protection. Typical applications are distributed power systems, instrumentation and industrial electronics, everywhere where space on the PCB is a critical factor. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TON 15-2410 3.3 VDC 3500 mA 86 % TON 15-2411 18 36 VDC 5.0 VDC 3000 mA 87 % TON 15-2412 (nominal 24 VDC) 12 VDC 1250 mA 87 % TON 15-2413 15 VDC 1000 mA 88 % TON 15-4810 3.3 VDC 3500 mA 85 % TON 15-4811 36 75 VDC 5.0 VDC 3000 mA 87 % (nominal 48 VDC) TON 15-4812 12 VDC 1250 mA 87 % TON 15-4813 15 VDC 1000 mA 88 % Add suffix SM for surface mount version DC/DC Converters TON 15 Series 15 Watt Input Specifications Input current at no load 24 V 3.3/5 Vout models: 20 mA typ 24 V 12/15 Vout models: 15 mA typ. 48 V 3.3/5 Vout models: 15 mA typ 48 V 12/15 Vout models: 10 mA typ. Input current at full load 24 V 3.3 Vout models: 590 mA typ. 24 V other output models: 750 mA typ. 48 V 3.3 Vout models: 300 mA typ. 48 V other output models: 380 mA typ. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS 300 132 part. 4.4) Start-up voltage / under voltage lockout 24 V models: 17 VDC / 14.5 VDC 48 V models: 33 VDC / 30.5 VDC Surge voltage (100 msec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Input filter capacitor type (see application note for compliance to EN 55022 class A/B) Radiated immunity EN 61000-4-3 10 V/m, perf. criteriy A Fast transient / surge EN 61000-4-4, 2 kV, perf. criteria B EN 61000-4-5, 1 kV perf. criteria A with external input capacitor e.g. Nippon chemi-con KY 220 F, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 3 Vrms, perf. criteria A Reflected ripple current 30 mAp-p typ. Output Specifications Voltage set accuracy 1 % Output voltage adjustment 10 % (see application note) Regulation Input variation Vin min. to Vin max 0.2 % max. Load variation 0 100 % 0.2 % max. Minimum load 0 % of rated max. load Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 Vout models: 75 mVpk-pk typ (measured with 1 F M/C and 10 F TC) 12 & 15 Vout models: 100 mVpk-pk typ Start up time Power On 30 ms typ. (constant resistive load) Remote On 30 ms typ. Transient response setting time (25% load step chang) 300 s typ. Short circuit protection indefinite (automatic recovery) Over load protection at 150 % of Iout max., foldback Over voltage protection 3.3 Vout models: 3.7 5.4 Vout 5 Vout models: 5.6 7.0 Vout 12 Vout models: 13.5 19.8 Vout 15 Vout models: 16.8 20.5 Vout Capacitive load 3.3 & 5.0 Vout models: 1000 F max. 12 Vout models: 330 F max. 15 Vout models: 220 F max. Supporting documents: www.tracopower.com/overview/ton15 All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.