TPC 030-124 TRACO Power

Industrial Power Supplies TPC Series, 30 to 120 Watt Features CB Scheme UL 60950-1UL 508 For industrial, ofcfi e and residential environments Meets European ErP directive (green mode), <0.3 W no load power consumption High efcfi iency across full load range Compact plastic casing Reliable snap-on mounting on DIN-rails or with wall mounting bracket (not included) Universal input 85264 VAC, 4763 Hz Models with 5, 12, 24 & 48 VDC output Output voltage adjustable Power good signal Low ripple and noise Overload and short-circuit protection Optional module for parallel and The TRACOPOWER TPC series is a family of lightweight DIN-rail power supplies with redundant operation an excellent price/performance ratio. They consume sparse standby power, and op- Worldwide safety approval package erate with high efcfi iency to comply with the requirements of the European Ecodesign 3-year product warranty directive. They have universal input of 85-264VAC or 90-375VDC and are designed for class I operation in industrial and residential environments. With the optional active current sharing redundancy module, these power supplies provide a very reliable true redundant DC supply. For further details see page 3. Models Order Code Input Voltage Output Power Output Voltage Output Current Ranges max. nominal /adj. range max. TPC 030105 20 W 5.0 VDC /5.06.0 VDC 4.0 A TPC 030112 26 W 12 VDC /1215 VDC 2.2 A TPC 030124 30 W 24 VDC /2428.8 VDC 1.25 A TPC 030148 30 W 48 VDC /4856 VDC 0.6 A 85 264 VAC TPC 055112 Universal Input 42 W 12 VDC / 1215 VDC 3.5 A 47/63 Hz TPC 055124 55 W 24 VDC /2428.8 VDC 2.3 A TPC 055148 90 375 VDC 55 W 48 VDC / 4856 VDC 1.15 A TPC 080112 72 W 12 VDC / 1215 VDC 6.0 A TPC 080124 80 W 24 VDC /2428.8 VDC 3.3 A TPC 080148 80 W 48 VDC /4856 VDC 1.7 A TPC 120112 96 W 12 VDC / 1215 VDC 8.0 A TPC 120124 120 W 24 VDC /2428.8 VDC 5.0 A TPC 120148 120 W 48 VDC /4856 VDC 2.5 A Industrial Power Supplies TPC Series 30 to 120 Watt Input Specifications Input voltage range AC nominal rated 110 240 VAC, 50-60 Hz AC range (designed for) 85 264 VAC, 47-63 Hz DC nominal rated 130 300 VDC DC range (designed for) 90 375 VDC Output derating at operation <100 VAC -2.5% /V at operation <130 VDC -1.0% /VDC Standby power consumption TPC 030 and 055 models: < 0.3 W TPC 080 and 120 models: < 0.5 W Harmonic limits EN 61000-3-2, Class A Recommended circuit breaker, characteristic C 6.0 16.0 A Output Specifications Output voltage adjustable range 5 VDC model: 5.0 6.0 VDC (potentiometer on frontpanel) 12 VDC models: 12 15 VDC 24 VDC models: 24 28.8 VDC 48 VDC models: 48 56 VDC Regulation Input variation 0.5 % max. Load variation (0100 %) 5 VDC models: 0.75 % max. other models: 0.5 % max. Ripple and noise (20MHz bandwidth) 100 mVpk-pk max. Short circuit protection <200 % of Iout nom. Overvoltage protection (% of max. adjustable voltage) 5 VDC model: <180 % 12 VDC models: <170 % 24 VDC models: <160 % 48 VDC models: <107 % Power back immunity 125 % of nominal Vout Start-up time 2 sec. max. Hold-up time (115 VAC / 230 VAC) min. 15 ms / min. 40 ms Power OK signal trigger 80 95 % PNP open collector max. current 48 VDC models: 5 mA other models: 10 mA General Specifications Temperature ranges Operating 25C to +70C max. Storage (non operating) 25C to +85C Temperature derating 2.5 %/K above 50C Humidity (non condensing) 95 % rel. H max. Temperature coefficient 0.02 %/K Remote On/Off 10 mA current source Efficiency (average at power consumption 25-100%) TPC 030-105: 79 % other 30 Watt models: 84 % other models: 87 % Reliability, calculated MTBF at +25C TPC 030 models: >2.2 Mio h (according to IEC-1709) TPC 055 models: >1.7 Mio h TPC 080 models: >1.5 Mio h TPC 120 models: >1.3 Mio h Isolation voltage (60 s) Input / Output 3000 VAC Altitude during operation 2000 m max.