TRA 1-2422 TRACO Power

DC/DC Converters TRA 1 Series, 1 Watt CB Scheme UL 60950-1 Features Semi-regulated output (load) Industry standard pinout High efcfi iency up to 88.5% Single and dual output models I/O isolation voltage 1000 VDC Operationally reliable up to 5000m altitude Operating temperature range 40C to +95C 3-year product warranty The TRA 1 series are miniature, I/O-isolated 1W DC/DC-converters with a semi load regulation. They are the ideal solution to power drivers and circuits where unregulated DC/DC converters do not meet the input voltage range at load change. Models Order code Input voltage Output voltage Output current Load regulation Efficiency typ. max. max. TRA 1- 0511 5 VDC 200 mA 6.5 % 84 % TRA 1- 0519 9 VDC 110 mA 5 % 87 % TRA 1- 0512 12 VDC 84 mA 5.2 % 87 % TRA 1- 0513 5 VDC 10% 15 VDC 67 mA 5 % 87.5 % TRA 1- 0521 5 VDC 100 mA 5.2 % 84.5 % TRA 1- 0522 12 VDC 42 mA 4.6 % 86.5 % TRA 1- 0523 15 VDC 34 mA 4.5 % 86.5 % TRA 1- 1211 5 VDC 200 mA 5 % 84 % TRA 1- 1219 9 VDC 110 mA 3.4 % 86.5 % TRA 1- 1212 12 VDC 84 mA 3.4 % 88.5 % TRA 1- 1213 12 VDC 10% 15 VDC 67 mA 2.7 % 88 % TRA 1- 1221 5 VDC 100 mA 3.9 % 84.5 % TRA 1- 1222 12 VDC 42 mA 2.9 % 88.5 % TRA 1- 1223 15 VDC 34 mA 2.6 % 87.5 % 5 VDC 200 mA 3.7 % 84 % TRA 1- 2411 TRA 1- 2419 9 VDC 110 mA 2.5 % 86.5 % TRA 1- 2412 12 VDC 84 mA 2.4 % 87.5 % TRA 1- 2413 24 VDC 10% 15 VDC 67 mA 2.3 % 87.5 % TRA 1- 2421 5 VDC 100 mA 3.7 % 83.5 % TRA 1- 2422 12 VDC 42 mA 2.4 % 87 % TRA 1- 2423 15 VDC 34 mA 2.3 % 87 % DC/DC Converters TRA 1 Series 1 Watt Input Specifications Input current no load / full load 5 Vin models 30 mA / 240 mA typ. 12 Vin models 12 mA / 100 mA typ. 24 Vin models 11 mA / 50 mA typ. Surge voltage (1 s max.) 5 Vin models 9 V max. 12 Vin models 18 V max. 24 Vin models 30 V max. Reflected input ripple current 12 Vin models 4 mA typ. other models 8 mA typ. Input filter internal capacitor Recommended input fuse (slow blow type) 5 Vin models: 500 mA 12 Vin models: 200 mA 24 Vin models: 100 mA Output Specifications Voltage balance (dual output models, balanced loads) 0.1 % typ. / 1 % max. Regulation Input variation (1 % change of Vin) 1.05 % typ. / 1.2 % max. Load variation see model table and graph 1 on page 3 Ripple and noise (20 MHz Bandwidth) 60 mVp-p max. Temperature coefficient 0.01 %/K typ. / 0.02 %/K max. Short circuit limited 0.5 s max. Capacitive load single output models: 220 F max. dual output models: 100 F max. (each output) General Specifications Temperature ranges Operating 40C to +95C Case temperature +95C max. Storage 50C to +125C Derating 5 %/K above +85C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >2000000 h Isolation voltage (60 s) Input/Output 1000 VDC Isolation capacitance Input/Output 60 pF typ. / 120 pF max. Isolation resistance Input/Output >1000 MOhm Switching frequency 50 to 120 kHz (frequency modulation) Altitude during operation up to 5000 m approved Safety standards IEC 60950-1:2005 (2nd edition) + Am 1:2009 EN 60950-1:2006 + Am 1:2010 + Am 11:2009 Safety approvals CB scheme IEC 60950-1 CSA certification UL 60950-1, CSA 60950-1-07 Certification documents www.tracopower.com/overview/tra1 All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.