TSH 2405S TRACO Power

DC/DC Converters TSH Series, 2 Watt Features Ultra compact SMD package (SOIC-14/18) Isolated single and dual output models I/O isolation 1000 VDC High efcfi iency up to 82% Operating temperature 40C to +85C Reflow solder temperature up to 245C High accuracy of pin Co-planarity Available in tape and reel package Lead free design, RoHS compliant 3year product warranty The TSH series are ultra miniature, isolated 2 Watt DC/DC-converters in SMD pack- age. The devices can be soldered without any problems in a high temperature lead 2 free solder process. Requiring only 1.5 cm board space they offer the ideal solution in many space critical applications. These converters are the ideal solution for point of load power conversion, ground loop elimination, noise reduction and digital interface applications. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TSH 0505S 5 VDC 400 mA 77 % TSH 0512S 12 VDC 165 mA 81 % TSH 0505D 5 VDC 10% 5 VDC 200 mA 77 % TSH 0512D 12 VDC 80 mA 79 % TSH 0515D 15 VDC 65 mA 79 % TSH 1205S 5 VDC 400 mA 78 % TSH 1212S 12 VDC 165 mA 82 % 12 VDC 10% TSH 1212D 12 VDC 80 mA 82 % TSH 1215D 15 VDC 65 mA 82 % TSH 2405S 5 VDC 400 mA 78 % TSH 2412S 12 VDC 165 mA 81 % 24 VDC 10% TSH 2412D 12 VDC 80 mA 81 % TSH 2415D 15 VDC 65 mA 82 % DC/DC Converters TSH Series 2 Watt Input Specifications Input current no load / full load 5 Vin models: 60 mA / 500 mA typ. 12 Vin models: 30 mA / 200 mA typ. 24 Vin models: 15 mA / 100 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reflected input ripple current can be reduced by ext. 13.3 F polyester film capacitor Input filter internal capacitors Output Specifications Voltage set accuracy 4 % max. Voltage balance (dual output models) 1 % max. Regulation Input variation 1.2 % / 1% change Vin Load variation 20 100 % 10 % max. Ripple and noise (20 MHz Bandwidth) 75 mV pk-pk max. Temperature coefficient 0.02 %/K Short circuit protection limited 1 sec. max. Capacitive load 5 VDC single output models: 47 F max. 5 VDC dual output model: 10 F max. 12 VDC single output models: 10 F max. 12/15 VDC dual output models: 4.7 F max. General Specifications Temperature ranges Operating 40C to +85C (no derating) Case temperature +105C max. Storage 55C to +125C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTTF (MIL-HDBK-217F, +25C, ground benign) >2000000 h Isolation voltage (60 sec.) Input/Output 1000 VDC Isolation capacitance Input/Output 60 pF typ. Isolation resistance Input/Output >1000 Mohm (at 500VDC) Switching frequency 100 kHz typ. (frequency modulation) Frequency change over line and load 30 % max. Physical Specifications Casing material non conductive black plastic (UL 94-V0 rated) Package weight single output models: 1.5 g (0.08 oz) dual output models: 2.2 g (0.05 oz) Lead-free reflow solder process as per IPC/JEDEC J-STD-020C peak temp. 245C (20 sec. max.) All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.