TXH 360-112 TRACO Power

Metal Case Power Supplies TXH Series, 120 480 Watt CB Scheme UL 60950-1 Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efcfi iency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable output voltage EMI/EMC compliance with EN 61000-6-3 and EN 61000-6-1 Compliance to EN 61000-3-2 (PFC) Short circuit and overvoltage protection 3-year product warranty The TXH series is a family of power supplies in metal enclosure, designed for a wide range of cost critical applications. The very high efcfi iency of up to 93% admits of a compact design with free air convection coouling for the 120 and 240 Watt models. The units are equiped with screw terminal blocks and are easy to install in any equipment. These power supplies have universal input and comply with European EMC stan- dards and the Low Voltage Directive (LVD). Models with Single Output Output Voltage VDC Output power Output current Efficiency Order code max. nominal * adjustable max. typ. at 230 VAC TXH 120-112 12 11.4 13.2 10 A 90 % TXH 120-124 120 Watt 24 22.8 26.4 5.0 A 91 % TXH 120-148 48 45.6 52.0 2.5 A 92 % TXH 240-112 12 11.4 12.6 20 A 90 % TXH 240-124 240 Watt** 24 22.8 25.2 10 A 92 % TXH 240-148 48 45.6 50.4 5.0 A 93 % TXH 360-112 12 10.8 13.2 30 A 89 % TXH 360-124 360 Watt 24 21.6 26.4 15 A 91 % TXH 360-148 48 44.0 51.0 7.5 A 93 % TXH 480-112 12 10.8 13.2 40 A 88 % TXH 480-124 480 Watt 24 21.6 26.4 20 A 90 % TXH 480-148 48 43.2 50.4 10 A 91 % * 36 VDC output voltage models on request. ** at 18 CFM airflow Metal Case Power Supplies TXH Series 120480 Watt Input Specifications Input voltage nominal 100 240 VAC AC range (universal input) 90 264 VAC DC range 120 370 VDC Input frequency 47 63 Hz Earth leakage current (240 VAC / 63 Hz) 360 W models: 300 A max. other models: 500 A max. Input current at full load at 115 VAC / 230 VAC 120 W models: 1.2 A typ. / 0.6 A typ. 240 W models: 2.3 A typ. / 1.1 A typ. 360 W models: 3.6 A typ. / 1.8 A typ. 480 W models: 5.1 A typ. / 2.5 A typ. Recommended circuit breaker 120 W models: 3.15 A (characteristic C) or slow blow fuse 240 W models: 5 A 360 W models: 6.3 A 480 W models: 10 A Output Specifications Voltage set accuracy 2 % max. Output voltage adjustment range details see table page 1 Regulation Input variation 1 % max. Load variation (0100%) 1 % max. Minimum load not required Ripple and noise (20 MHz bandwidth) mVp-p max. Models: 12 VDC 24 VDC 48 VDC 120 W 120 240 480 240 W 120 200 200 360 W 150 200 200 480 W 100 200 300 Hold-up time 10 ms min. Current limitation 130 - 150 % foldback, auto recovery Short circuit protection indefinite, 360 & 480 W models: auto recovery 120 & 240 W models: no auto recovery (power disconnect required) Overvoltage protection by Zener diode 120 % of Vout typ. 360 & 480 W models: auto recovery 120 & 240 W models: no auto recovery (power disconnect required) Overtemperature protection for 360 & 480 W models only, auto recovery Capacitive load, F max. Models: 12 VDC 24 VDC 48 VDC 120 W 23000 10000 470 240 W 23000 10000 470 360 W 85000 48000 13000 480 W 180000 75000 25000 General Specifications Temperature ranges Operating 480/360/120 W models: 25C to +70C other models: 10C to +70C Storage (non operating) 25C to +85C Derating Ambient temperature all models: 2.5 %/K above +50C TXH 480-122: 2.0 %/K below 5C Low input voltage TXH 480-122: 0.35 %/V below 180 VAC other models 1.0 %/V below 100 VAC Temperature coefficient 0.03 %/K Humidity (non condensing) 95 % rel max. All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.