AC/DC Power Supply TXM 200 Series, 200 Watt Compact 200 Watt metal cased power supplies Fully convection cooled power supplies Cost efficient design High operating temperature up to 65C Universal AC input 90 - 264 VAC Active power factor correction >0.95 Withstand 300 VAC surge input for 5 s Adjustable output voltage Over current limitation and short circuit protection 3-year product warranty UL 62368-1 IEC 62368-1 The TXM 200 series is a family of 200 Watt encased AC/DC power supplies designed for cost critical applications. It extends the existing TXM series which ranged from 15 to 150 Watt with an additional 200 Watt series. With a com- pact metal case and screw terminal block connections, they are easy to install in any equipment. There are three models of single output voltages from 12 VDC to 48 VDC. They also feature an universal input and comply with EN 55032 class B and the latest IEC/UL 60950-1 edition to cover a wide range of applications. Models Order Code Output Power Output Voltage Output Current Efficiency max. nom. (adjustable) max. typ. TXM 200-112 200 W 12 VDC (10.0 - 15.5 VDC) 16 700 mA 87 % TXM 200-124 24 VDC (20.0 - 27.2 VDC) 8 400 mA 88 % 202 W TXM 200-148 48 VDC (42.0 - 53.0 VDC) 4 200 mA 89 % Page 1 / 4 www.tracopower.com March 23, 2021TXM 200 Series, 200 Watt Input Specifications Input Voltage - AC Range 90 - 264 VAC (Full Range) - DC Range 120 - 375 VDC (Designed for, no certification) (Surge voltage (5 s max.): 300 VAC max.) Input Frequency 47 - 63 Hz Input Current - Full Load & Vin = 115 VAC 3 000 mA max. Power Consumption - At no load 5 000 mW max. Input Inrush Current - At 230 VAC 50 A max. - At 115 VAC 30 A max. Power Factor - At 230 VAC 0.95 min. (Active Power Factor Correction) - At 115 VAC 0.98 min. (Active Power Factor Correction) Recommended Input Fuse (The need of an external fuse has to be assessed in the final application.) Output Specifications Output Voltage Adjustment 12 VDC model: 10.0 - 15.5 VDC 24 VDC model: 20.0 - 27.2 VDC 48 VDC model: 42.0 - 53.0 VDC (By trim potentiometer) Output power must not exceed rated power Voltage Set Accuracy 1% max. (24 & 48 VDC models) 2 % max. (12 VDC models) Regulation - Input Variation (Vmin - Vmax) 0.5% max. - Load Variation (0 - 100%) 1% max. (24 & 48 VDC models) 2% max. (12 VDC model) Ripple and Noise 12 VDC model: 150 mVp-p max. (w/ 0.1 F // 10 F) (20 MHz Bandwidth) 24 VDC model: 200 mVp-p max. (w/ 0.1 F // 10 F) 48 VDC model: 150 mVp-p max. (w/ 0.1 F // 10 F) Minimum Load Not required Temperature Coefficient 0.03 %/K max. Hold-up Time - At 230 VAC 16 ms min. - At 115 VAC 16 ms min. Start-up Time - At 230 VAC 2 000 ms max. - At 115 VAC 4 000 ms max. Start-up Overshoot Voltage 5% max. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 105 - 150% of Iout max. Transient Response - Response Deviation 5% max. (75% to 100% Load Step) - Response Time 400 s typ. (75% to 100% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 - Certification Documents www.tracopower.com/overview/txm200 Protection Class Class I (Prepared): Connection to PE Pollution Degree PD 2 Over Voltage Category OVC II All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com March 23, 2021