Proof of Performance SignalTEK CT Data Cable Transmission Tester Proof of PerformanceIf you install or maintain data cabling, SignalTEK CT allows you to generate SignalTEK CT PDF test reports that prove installed links run at Gigabit Ethernet transmission rates. For installers, this means having a cost-effective way to demonstrate the cabling is installed correctly and supports any Ethernet application running at up to 1 Gb/s. By proving real world performance, SignalTEK CT documents the quality of an installation - reducing the risk of call backs. Data Cable SignalTEK CT also gives network owners the assurance that network cabling Transmission Tester will support critical services like VoIP, IP CCTV, control systems, and video Proof of Performance streaming anywhere Ethernet is deployed from a small residential, retail or commercial LAN to industrial plants, enterprise and campus networks. Todays challenge The foundation of all Ethernet networks is the physical cabling. Systems that were never thought of as data networks are quickly migrating from analog communication to digital data transmission, integrating Ethernet into nearly all low voltage systems. Network cabling installed into harsh environments may become more susceptible to disruption from external interference as well as faulty cabling or terminations. These physical layer problems can reduce throughput by causing dropped data frames, slowing the network as it retransmits lost data resulting in poor performance for users. To avoid performance issues, todays installers and technicians must not only verify correct wiring but also stress-test a link to confirm its ability to transmit at maximum rate. Autotest from remote unit Tomorrows solution for one person testing SignalTEK CT proves a links ability to provide error-free performance at full Gigabit speeds by performing a complete physical termination and data transmission test. With a quick Autotest, SignalTEK CT transmits a full 10 Gb of data bi-directionally across the link and reports any transmission errors against performance criteria defined by the IEEE 802.3ab Gigabit Ethernet Standard. Just 1 bit of corrupt or lost data among the 10 billion bits transmitted will fail the performance standard. SignalTEK CT performs a complete installation test with TDR fault detection to identify and locate any physical problem, such as an errant nail, screw, or unseen conduit burr. SignalTEK CT will identify faults to the individual conductor rather than a pair, speeding the process of locating and correcting the problems. Easy transfer of test results using USB SignalTEK CT offers the same peace of mind provided by complex cable certifiers flash drive with test results backed up by an internationally recognized standard. But unlike those costly certifiers, it is so easy to use that even the most novice technician can test a complete cabling plant or troubleshoot a single link quickly and accurately. Replaceable RJ45 contacts