Free NetCommander-AXS Management Software is available for access and control of all of your Tripp Highlights
Lite NetCommander IP KVM switches (B070 and B072 series). From a single interface, you can access
Control computers/servers
server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDU's, and manage
locally or via LAN, WAN or
KVM settings. This software can be found on the model support page of the B070-016-19-IP, or via
Internet
searching NetCommander-AXS on www.tripplite.com
Occupies just 1U of space in a
NetCommander 16-Port Cat5 1U Rack-Mount 1+1
rack-mountable drawer
User Console KVM Switch with 19-in. LCD and IP
Low-cost Cat5 cabling allows
Remote Access
longer distances, reduces cable
MODEL NUMBER: B070-016-19-IP clutter
19 LCD screen supports video
resolutions up to 1366 x 768
Simultaneous support for 2
users 1 local, 1 remote
Compliant with the Federal
Trade Agreements Act (TAA) for
GSA Schedule purchases
Free Management Software
available to Access and Control
all of your Tripp Lite
NetCommander IP KVM's (B070
and B072 IP series) from a
Description
single interface
Tripp Lites B070-016-19-IP KVM Switch gives you a rack-mountable full keyboard, LCD and touchpad in
Fast Virtual Media KVM System
a single console that occupies only 1U of rack space. Easy to install and use, its the optimal solution for
patented under Pat. No. US
controlling up to 16 computers/servers locally, from across the room, down the street or halfway around
9,417,720
the globe on a LAN, WAN or Internet.
System Requirements
The B070-016-19-IP uses inexpensive, user-supplied Cat5e/6/6a cabling with Server Interface Units so
Computer with HD15 port, and
you can control computers/servers located up to 100 ft. away from the switch. This switch features two
USB port or PS/2
10/100 Mbps LAN ports, so if one fails, the other takes over, keeping remote access uninterrupted. Users
keyboard/mouse ports
can switch easily between the 16 ports using an on-screen display (OSD). Multi-level password protection
User-supplied Cat 5e/6/6a
prohibits unauthorized users from accessing the connected computers, and a local user and a remote
cabling
user can be logged on simultaneously. The built-in 19 LCD screen supports video resolutions up to 1366
x 768.
B078-101-USB-1 (USB) or
B078-101-USB2 (USB) Server
Two serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers; you
Interface Unit is required for
can assign individual ports to an IP PDU port to power on/off the server connected to that port. The B070-
each connected
016-19-IP stores neatly in a rack drawer and pulls out when needed. This KVM console is compatible with
computer/server; the B078-101-
both Windows and Linux operating systems. Heavy-duty steel housing stands up to frequent use.
Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
1 / 4
USB2 is required for Fast Virtual
Free NetCommander-AXS Management Software is available for access and control of all of your Tripp
Media speeds up to 12Mbps;
Lite NetCommander IP KVM switches (B070 and B072 series). From a single interface, you can access
the B078-101-USB-1 can be
server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDU's, and manage
used for Virtual Media, but only
KVM settings. This software can be found on the model support page of the B070-016-19-IP, or via
at speeds up to 1Mbps
searching NetCommander-AXS on www.tripplite.com
Compatible with Windows and
Features
Linux operating systems
Saves Space and Money
Remote console computers
Combines 16-port KVM switch, 19 LCD screen, keyboard and touchpad in a single 1U rack-mountable
require minimum Pentium 4 with
drawer
2 GB memory
Mounts into 19-wide rack, 27-42 deep; to mount in a 2-post rack, use Tripp Lites B019-000
Hardware versions: A new
Inexpensive Cat5e/6/6a cabling lets you locate servers up to 100 ft. from the switch
hardware version (v2) of the
Use a Server Interface Unit, B078-101-USB-1 (for USB) with each server that will be connected with
B070-016-19-IP was released in
Cat5 cable
2014, and it requires different
firmware than was used in the
IP Remote Access for Fewer Trips to the Server Room
previous version (v1). In the
Remote access means theres no need to travel to the server room or network closet
Support tab on this web page
Java-based application allows access via web browser; non-browser client that can bypass browser-
you will find a zip folder for the
related Java Security prompts is available
v1 KVM. In addition to including
1 local + 1 remote user can access different ports concurrently; up to 5 users can share a single session
the applicable firmware, it
Supports both IPv4 and IPv6
contains a FW Notes file that will
Free Management Software available to Access and Control all of your Tripp Lite NetCommander IP
tell you how to determine which
KVM's (B070 and B072 IP series) from a single interface
hardware version you have, and
therefore, which firmware you
Simplifies IT Tasks
need to use. If you have a v2
On-screen display, hot keys and remote toolbar for easy use
KVM, the latest firmware is that
2 serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers
which came pre-installed on the
Add IP PDUs as devices that can be controlled by the KVM; assign individual ports to an IP PDU port to
KVM.
power on/off the server connected to that port
Power consumption: 120V,
Virtual Media allows a .iso file to be mounted to a target server and accessed as if it were directly stored
60Hz, 30W
on it
Fast Virtual Media KVM System patented under Pat. No. US 9,417,720
Package Includes
System-sent messages to SNMP server notify you of LAN failures
B070-016-19-IP 1U rackmount
Supports RADIUS and LDAP/S authentication
console KVM switch with 19
Log tracks events on your installation
LCD
C13 to 5-15P power cord
Large 19 LCD
Rackmount hardware
Supports video resolutions up to 1366 x 768; 1920 x 1080 remotely
DDC emulation allows for optimal output to LCD
2 / 4