Highlights Isolator Series 120V 1000W Isolation Completely isolated protection Transformer-Based Power Conditioner, 4 Outlets with enhanced surge suppression and noise filtering MODEL NUMBER: IS1000 Faraday Shield offers 100% isolation from the input AC line 1000-watt continuous capacity with 4 NEMA 5-15R outlets 680-joule surge suppression rating 6-ft. power cord with NEMA 5-15P plug 9A circuit breaker provides overload protection Convenient, lighted power switch for simple power control Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases Description Get complete protection for sensitive devices and prevent power disruption with Tripp Lites Isolator IS1000 Package Includes Isolation Transformer. Featuring an internal isolation transformer with Faraday Shield, the IS1000 completely IS1000 Isolation Transformer isolates equipment from line noise that can cause incremental but devastating equipment damage. Its 680-joule Owners Manual surge suppression rating protects equipment from surges and spikes caused by utility power disruptions and the operation of nearby equipment on the same circuit. Its 6-ft. power cord allows for flexibility during installation, while its built-in circuit breaker prevents dangerous circuit overloads. Its 1000-watt capacity allows it to be used with a variety of sensitive equipment. Its 4 widely spaced NEMA 5-15R outlets accommodate bulky transformers, and its lighted power switch offers convenient, one-touch power control. For peace of mind, the IS1000 features a rugged, all-metal housing. Features Tripp Lite Isolator series isolation transformer-based power conditioners offer complete line isolation, continuous noise filtering and enhanced common mode surge suppression Supports combined loads up to 1000 watts continuous/8.3A at 120V Isolation transformer with Faraday Shield offers 100% isolation from the input AC line Neutral to ground bonding at the secondary eliminates common mode noise and provides an isolated ground reference for sensitive equipment Isolation transformer design serves as an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades Removes EMI/RFI noise, utility switching transients, background spikes and power problems generated by other on-site loads, utility grid-switching and lightning related surges Line isolation with additional surge suppression components offer continuous line filtering of a full range of power line noise in all modes Continuous transformer filtering with no wearable parts reduces surges in the worst of power environments to harmless levels Includes 4 widely-spaced NEMA5-15R output receptacles, 6 ft power cord, circuit breaker overload protection and lighted power switch Rugged all-metal housing ships ready for upright tower or wallmount installation Specifications 1 / 3 OVERVIEW Efficiency 96% Let-through Voltage (Combination L-N: <130V L-G: <10V N-G: <0.5V IEEE C62.41 Cat. B Wave) Let-through Voltage (Ring Wave) L-N: <10V L-G: <10V N-G: <0.5V IEEE C62.41 Cat. A Nominal Voltage / Frequency 120V / 60Hz Over Current Protection Yes, 9.0A circuit breaker Suppression Joule Rating 680 Surge Test Conditions Per ANSI/IEEE C62.41 - IEEE587 Cat. A & B test waveforms Total Harmonic Distortion less than 1% VA / Watt Capacity 1000 Transformer Type Low impedence transformer-based line isolation transformer OUTPUT Output Receptacles (4) 5-15R Output Amp Capacity 8.3 INPUT Input Cord Length (ft.) 6 Input Cord Length (m) 1.83 Input Plug Type NEMA 5-15P SURGE / NOISE SUPPRESSION Noise Suppression Rating 33-65dB normal mode >80dB common mode PHYSICAL Shipping Dimensions (hwd / in.) 6.25 x 13 x 7.5 Shipping Dimensions (hwd / cm) 15.88 x 33 x 19.1 Shipping Weight (lbs.) 24.6 Shipping Weight (kg) 11.15 Unit Dimensions (hwd / in.) 5.5 x 6.25 x 8.5 Unit Dimensions (hwd / cm) 13.97 x 15.88 x 21.6 Unit Weight (lbs.) 22.6 Unit Weight (kg) 10.25 Cooling Method Convection Form Factors Supported Tower 2 / 3