P561-100-EZ Tripp Lite

In most applications, a signal booster (Model Number: B120-000-SL) should be used with this cable to Highlights ensure a signal strong enough for your display. An alternate solution is to use a Tripp Lite DVI over Cat5 Two-piece design runs through Extender (Model Number: B140-101X) in place of a 100 ft. DVI cable and signal booster. conduit or other tight areas DVI Single Link Easy Pull Digital TMDS Monitor Threaded circular DIN connector Cable (DVI-D M/M), 100-ft. provides secure reattachment High Speed Digital MODEL NUMBER: P561-100-EZ Transmission to 9.9Gbps Superior molded cables with foil/braid shielding for maximum EMI/RFI protection Contstructed using 24AWG wire for optimal performance Package Includes 100-ft. Easy Pull All-in-One DVI Single Link Cable (DVI-D M/M) Description Tripp Lite s 100 ft. DVI-D Single Link Easy Pull All-in-One Monitor Cable makes running long length video cables a snap. The pull-apart design allows the cable to be run through conduit or other tight areas that a DVI connector wouldn t fit through. Diameter of the circular DIN end is only 7/8 . Circular Easy Pull connector is threaded to ensure maximum security once the cable is reattached. Use in conjunction with DVI video cards that are specified as Single Link. DVI connectors are molded, have integral strain relief for long life reliability, and a ferrite collar to drain off extraneous electrical interference. The P561-100-HD is constructed using 24AWG wire for optimal performance. In most applications, a signal booster (B120- 000-SL) will need to be used with this cable to ensure a signal strong enough for your display. Features Two-piece design runs through conduit or other tight areas Threaded circular DIN connector provides secure reattachment For use with Single Link TMDS specified equipment Compatible with Flat Panel Displays, Digital CRT Displays and Projectors High Speed Digital Transmission to 9.9Gbps Superior molded cables with foil/braid shielding for maximum EMI/RFI protection Constructed using 24AWG wire for optimal performance In most applications, a signal booster (B120-000-SL) will need to be used with this cable to ensure a signal strong enough for your display 1 / 2Specifications INPUT Cable Length (ft.) 100 Cable Length (m) 30.5 PHYSICAL Color Black CONNECTIONS Side A - Connector 1 DVI-D SINGLE LINK (MALE) Side B - Connector 1 DVI-D SINGLE LINK (MALE) WARRANTY Product Warranty Period Lifetime limited warranty (Worldwide) 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite s testing agencies: