Highlights 2400W PowerVerter Plus Industrial-Strength Designed for heavy duty and Inverter with 2 Outlets motor loads MODEL NUMBER: PV2400FC 24V DC input 120V AC output 2 outlets 2400W continuous output Peak surge output: OverPower (up to 1 hour)3600W Double- Boost (up to 10 seconds)4800W High-efficiency power conversion Automatic overload protection Package Includes PV2400FC Inverter Instruction manual Description Continuously supplies up to 2400W of 120V AC power to 2 AC outlets from any 24V battery or automotive DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a set of high current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes in powering motors and other inductive loads with high-current startup needs. NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 250a should be positioned no more than 18 from the PV2400FC s battery in the positive line. Features Converts 24V DC battery power to 120V AC power 2400W continuous output power Peak surge output: OverPower (up to 1 hour), 3600 watts Double-Boost (up to 10 seconds), 4800W Set of 2 bolt-down DC wiring terminals for 24V battery connection 2 x NEMA 5-15/20R outlets Frequency control for operating stability High-efficiency operation conserves batteries to prolong run time Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low) DC fusing protects inverter against overload High-impact polycarbonate housing RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4) Specifications 1 / 3OUTPUT Nominal Output Voltage(s) 120V Supported Frequency Compatibility 60 Hz Output Receptacles (2) 5-15R Output (Watts) 2400 Continuous Output Capacity (Watts) 2400 Peak Output Capacity (Watts) 4800 Output Voltage Regulation Maintains PWM sine wave output voltage of 120 V AC (+/-5%) Output Frequency Regulation 60 Hz (+/- 0.3 Hz) Overload Protection Circuit breaker INPUT Recommended Electrical Service Requires 24V DC input source capable of delivering 120A for the required duration (when used at full capacity). For automotive applications, professional hardwire installation with 250A battery system fusing is recommended Maximum Input Amps / Watts Full continuous load - 120A at 24V DC No load - 2.2A at 24V DC Input Connection Type Set of 2 bolt-down DC wiring terminals Input Cord Length Details User supplies cabling 2/0 gauge or larger recommended Voltage Compatibility (VDC) 24 BATTERY DC System Voltage (VDC) 24 USER INTERFACE, ALERTS & CONTROLS Front Panel LEDs Set of 6 LEDs provides continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences Switches 3-position on/off/remote switch enables simple on/off power control plusremot setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory PHYSICAL Shipping Dimensions (hwd / in.) 13.5 x 15 x 21.5 Shipping Dimensions (hwd / cm) 34.29 x 38.1 x 54.61 Shipping Weight (lbs.) 43 Shipping Weight (kg) 19.5 Unit Dimensions (hwd / in.) 7.25 x 8.5 x 16.25 Unit Dimensions (hwd / cm) 18.42 x 21.59 x 41.28 Unit Weight (lbs.) 39 2 / 3