Model 66 3/8 Square Multiturn Cermet Trimming Potentiometer ELECTRICAL Standard Resistance Range 10 Ohms to 2 Megohms Standard Resistance Tolerance 10% (<100 Ohms = 20%) Input Voltage 200 Vdc Max. or rms not to exceed power rating Slider Current 100 mA Max. or within rated power, whichever is less Power Rating 0.5 Watts at 70C derating to 0 at 125C End Resistance 2 Ohms Max. Actual Electrical Travel 20 turns nominal Dielectric Strength 1,000 Vrms Insulation Resistance 1,000 Megohms Min. Resolution Essentially infinite Contact Resistance Variation 1% or 1 Ohm Max., whichever is greater ENVIRONMENTAL Seal 85C Fluorinert (No Leaks) Temperature Coefficient 100 ppm/C (<100 Ohms = 250 ppm/C) Operating Temperature Range 65C to +150C Thermal Shock Five cycles 65C to +150C (1% RT, 1% VR) Moisture Resistance Ten 24 hour cycles (1% RT, IR 1,000 Megohms Min.) Shock 6 ms sawtooth, 100 Gs (1% RT, 1% VR) Vibration 20 Gs, 10 to 2,000 Hz (1% RT, 1% VR) High Temperature Exposure 250 hours at 125C (2% RT, 2% VR) Rotational Life 200 cycles (3% RT) Load Life 1,000 hours at 70C & 0.5 Watts (2% RT) Resistance to Solder Heat 260C for 10 sec. (1% RT) MECHANICAL Mechanical Stops Clutch action, both ends Torque, Starting 5 oz.-in. Max. (0.035 N-m) Weight 0.04 oz. nominal (1.1 grams) Specifications subject to change without notice. Fluorinert is a registered trademark of 3M Company. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 Website: www.bitechnologies.com June 3, 2010 Model 66 page 1 of 3Model 66 PACKAGING Standard (no code): Boxes. Capacity = 100 units for 66W. 50 units for all other pin styles. Option (TR code, available for 66W & 66X only): Tape & Reel. All units oriented with 1 pin to the right of the direction of feed. Tape Width = 18 mm Sprocket = Single hole, 0.050 spacing Capacity = 1,000 units Seat plane to centerline of sprocket hole = 0.71 (18 mm) Reel Diameter = 14 (363 mm) Option (AP code, available for 66X & 66W only): Ammo Pack. All units oriented with 1 pin to the right of the direction of feed. Ammo Tape Fold = 12 (305 mm) Box = 1.8 x 13 x 10 (46 mm x 330 mm x 254 mm) Option (TB code): Tubes. All units oriented with 1 pin to same side. Tube capacity = 50 units. Pin Style P W X Dimensions Width = 0.57 0.28 0.28 Height = 0.66 0.93 0.93 Length = 20.9 20.6 24.4 ORDERINGINFORMATION 66 P F R 10K LF XX Model Series Packaging Option: no code = Box (standard) Pin Style TR = Tape & Reel (Pin Styles W, X only) AP = Ammo Pack Optional 0.70 lead length for AP & TB = Tubes (Pin Styles P, W, X only) TR packaging, pin style W & X only Resistance Prefix Resistance Value Optional RoHS compliant product code CIRCUITDIAGRAM (2) (1) (3) CW BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 Website: www.bitechnologies.com June 3, 2010 Model 66 page 2 of 3