GCR2010EW-470KFT3 TT Electronics

Glueable Chip Resistor GCR Series Suitable for conductive adhesive Planar and wraparound versions High temperature operation to 200C Non-magnetic (G, P & EW types) Range 0805 to 2512 at 1R0 to 10M RoHS compliant Electrical Data Size 0805 1206 2010 2512 Power 70C W 0.125 0.25 0.625 1 Resistance range ohms 1R0 to 10M Tolerance % 1, 5 LEV V 150 200 400 500 TCR ppm/C <10R:200 10R:100 Operating temperature C -55 to +200 Thermal Impedance C/W 220 160 75 40 Values E24 or E96 preferred - other values to special order Physical Data (All dimensions in mm and nominal weight in g) L W T A & C Wt. G & P types EW & GW types 2.0 1.25 0.5 0.4 0805 0.009 +0.2/-0.15 0.15 0.15 0.2 3.15 1.6 0.5 0.45 T T 1206 0.020 +0.2/-0.2 0.15 0.15 0.2 W A 5.0 2.5 0.65 0.5 L L 2010 0.036 W A 0.2 0.2 0.15 +0.25/-0.3 Wrap-around terminations 6.25 3.2 0.65 0.6 2512 0.055 (3 faces) 0.25 0.2 0.15 +0.25/-0.3 Construction Marking Planar gold G type or PtAg P types: Electrodes, resistor material The components are not marked all data is printed onto the and overglaze are printed onto an alumina substrate. The packaging. resistors are laser trimmed to the required value and protected. Solvent Resistance Wraparound EW type: Thick-film PtAg electrodes, resistor The component is resistant to all normal industrial cleaning material and overglaze are printed onto an alumina substrate. solvents suitable for printed circuits. The resistors are laser trimmed to the required value and protected. The terminations are wraparound coated with a polymer Ag material. Wraparound GW type: These are made as the EW type then plated with a nickel barrier and Gold. All termination styles are suitable for attachment with conductive adhesive. General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com TT electronics plc 08. 11Glueable Chip Resistor GCR Series Performance Data Maximum Derating Curve Load at rated power (1000hrs at 70C) R 2% + 0.01 P/Pr Derating from rated power at 70C See Derating Curve 100% Short term overload R 1% + 0.01 Dry heat (1000hrs at 200C) R 2% + 0.01 Damp heat steady state (56 days, 40C, 90% RH) R 1% + 0.01 0 70 155 200 Climatic R 1% + 0.01 AmbienttemperaturedegC Temperature rapid change (5 cycles -55C to +200C) R 1% + 0.01 Packaging 0805 and 1206 GCR series resistors are supplied on 8mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel 3000. 2010 and 2512 GCR series resistors are supplied on 12mm carrier tape and 7 inch reels as per IEC 286-3, quantity per reel 2010: 3000pcs 2512: 1800pcs. Ordering Procedure Example: GCR1206 in gold planar format at 10 kilohms and 1% tolerance packed in tape. GCR1206 G - 10K F T3 Type Terminations G Gold planar P PtAg planar EW Polymer Ag wraparound GW Ni Barrier & Au plated wraparound Value (use IEC62 code) Tolerance (use IEC62 code) F 1% J 5% Packing T3 0805, 1206, 2010 up to 3000/reel Tape Standard T18 2512 up to 1800/reel General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com TT electronics plc 08. 11