Magnetics High Power High Performance Molded Surface Mount Inductors Model HA72E-06 Features and Benefits Operating Temperature Range -40C to +155C Temperature Rise, Maximum 50C Operating Frequency Up to 3MHz AEC-Q200 Grade 0 CERTIFIED RoHS Compliant NOT SUPPORTED FOR NEW DESIGN FOR AUTOMOTIVE DESIGNS, PLEASE REFER TO HA72L FOR INDUSTRIAL DESIGNS, PLEASE REFER TO HM72L Specification 25C DCR (m) Heating (1) (3) (2) Inductance Isat Part Number Current H20% (Adc) Typ. Max. (Adc) HA72E-06R10LF 0.10 26.2 45.0 1.5 1.7 HA72E-06R20LF 0.20 20.3 34.0 2.5 2.8 HA72E-06R33LF 0.33 18.0 22.0 3.2 3.9 HA72E-06R47LF 0.47 16.1 19.0 4.0 4.2 0.68 14.4 16.5 5.0 5.5 HA72E-06R68LF HA72E-061R0LF 1.00 10.3 15.0 9.0 10.0 HA72E-061R5LF 1.50 8.4 10.0 13.0 14.0 2.20 8.3 8.5 18.0 20.0 HA72E-062R2LF 3.30 6.6 8.0 26.5 30.0 HA72E-063R3LF HA72E-064R7LF 4.70 5.4 6.5 39.0 42.0 6.80 4.1 5.0 62.0 68.0 HA72E-066R8LF HA72E-068R2LF 8.20 3.5 4.2 80.0 100.0 HA72E-06100LF 10.0 3.2 4.0 100.0 105.0 33.0 1.8 2.5 302.0 332.0 HA72E-06330LF Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) The Heating Current is the approximate DC current which causes the component temperature to increase by 50C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. (4) The part temperature (ambient + temperature rise) should not exceed 155C. Outline Dimensions (mm) BI Technologies General Note A-1445, Jalan Tanjung Api TT Electronics reserves the right to make changes in product specification without notice or liability. 25050 Kuantan All information is subject to TT Electronics own data and is considered accurate at time of going to print. Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 TT Electronics plc High Power High Performance Molded Surface Mount Inductors Model HA72E-06 Electrical Characteristic 25C Packaging / Ordering Information One reel (13) 2000 pcs One shipping carton (6 reels) 12000 pcs Ordering Information 13 tape & reel packing Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10H, denotes the decimal point BI Technologies General Note A-1445, Jalan Tanjung Api TT Electronics reserves the right to make changes in product specification without notice or liability. 25050 Kuantan All information is subject to TT Electronics own data and is considered accurate at time of going to print. Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 TT Electronics plc