Magnetics 0 Make Possible Electrical / Environmental HM72E-12 High Power High Performance High Power High Performance Molded Molded Surface Mount Inductors Surface Mount Inductors Operating & Storage Temperature -40C to +155C Model HM72E-12 Temperature Rise, Maximum 40C 0 Features and Benefits Operating Frequency Up to 5MHz Electrical / Environmental HM72E-12 Operating Temperature Range -40C to +155C High Power High Performance Molded Temperature Rise, Maximum 40C Surface Mount Inductors Operating & Storage Temperature -40C to +155C Operating Frequency Up to 5MHz Temperature Rise, Maximum 40C RoHS Compliant Specification 25C Operating Frequency Up to 5MHz (1) Heating (3) Inductance DCR (m ) Isat (2) Part Number Current (Adc) H20% Typ. Max. Specification 25C (Adc) (1) Heating (3) Inductance DCR (m ) Isat (2) HM72E-12R68HLF 0.68 35 35 1.4 1.6 Part Number Current (Adc) H20% Typ. Max. Specifications 25C (Adc) HM72E-121R0HLF 1.00 32 31 1.7 2.0 HM72E-12R68HLF 0.68 35 35 1.4 1.6 Heating 2.5 3.0 (1) HM72E-12(3)1R5HLF 1.50 27 27 1.7DCR (m) 2.0 HM72E-121R0HLF Induct1.00ance 32 Isat31 (2) Part Number Current H20% (Adc) HM72E-121R5HLF 1.50 27 27 2.5 3.0 (Adc) Typ. Max. HM72E-122R2HLF 2.20 22 24 3.5 4.2 3.5 4.2 HM72E-122R2HLF 2.20 22 24 HM72E-12R68HLF 0.68 35 35 1.4 1.6 HM72E-123R3HLF 3.30 18 20 5.7 6.8 HM72E-121R0HLF 1.00 32 31 1.7 2.0 HM72E-123R3HLF 3.30 18 20 5.7 6.8 HM72E-121R5HLF 1.50 27 27 2.5 3.0 16.4 17.2 HM72E-12100HLF 10.0 10 9 16.4 17.2 HM72E-12100HLF 10.0 10 9 HM72E-122R2HLF 2.20 22 24 3.5 4.2 HM72E-12200HLF 20.0 5 8 37.0 40.5 37.0 40.5 HM72E-123R3HLF 3.30 18 HM720 2E-122005.7H LF 26.8 0.0 5 8 HM72E-124R7HLF 4.70 13 15 9.3 11.2 HM72E-126R8HLF 6.80 11 11 13.1 14.0 Notes: HM72E-12100HLF 10.0 10 9 16.4 17.2 (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. HM72E-12200HLF 20.0 5 8 37.0 40.5 (2) The Heating Current is the approximate DC current which causes the component temperature to Notes: increase by 40C. This current is determined by soldering the component on a typical application PCB, (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. Notes: and then applying the current to the device for 30 minutes. (2) The Heating Current is the approximate DC current which causes the component temperature to increase by 40C. This current is determined by soldering the component on a typical application (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by PCB, and then applying the current to the device for 30 minutes. (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. 20% typical from its initial (zero DC) value. (4) The part temperature (ambient + temperature rise) should not exceed 155C. (2) The Heating Current is the approximate DC current which causes the component temperature to (4) The part temperature (ambient + temperature rise) should not exceed 155C. increase by 40C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. Outline Dimensions (mm) (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. (4) The part temperature (ambient + temperature rise) should not exceed 155C. Outline Dimensions (mm) Recommended Top View Side View Bottom View PCB layout Outline Dimensions (mm) Recommended Top View Side View Bottom View PCB layout General Note T T ElectrMAonicsGN reserETvIesC CtheO righMPOt toN makENTe changS es in product specification without notice or liability. We reserve the right to change specifications without prior notice. All information is subject to T T Electronics own data and is considered accurate at time of going to print. w w w.electrtt onicsmagnecs.cti om Page 1 OF 2 T T Electronics plc Rev. 01 www.bitechnologies.com MAGNETIC COMPONENTS We reserve the right to change specifications without prior notice. Page 1 OF 2 www.bitechnologies.comHigh Power High Performance Molded Surface Mount Inductors Make Possible Model HM72E-12 Electrical Characteristic 25C Packaging One reel (13) 400 pcs One shipping carton (6 reels) 2400 pcs Ordering Information HM72E - 12 R68 LF TR13 Model Series 13 tape & reel packing Case Size Lead Free Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10H, R denotes the decimal point. General Note T T Electronics reser ves the right to make changes in product specification without notice or liability. All information is subject to T T Electronics own data and is considered accurate at time of going to print. w w w.electrtt onicsmagnecs.cti om T T Electronics plc Rev. 01