Lower Range High Resistors Welwyn Components Voltage Chip Resistors Lower Range High Lower Range High LHVC Series Welwyn Components Voltage Chip Resistors Voltage Chip Resistors Superior voltage performance over commercial range chips LHVC Series LHVC Series 0603 to 2512 sizes Superior voltage performance over Resistance 50K to 10M Superior voltage performance over commercial range chips commercial range chips RoHS compliant 0603 to 2512 sizes 0603 to 2512 sizes Resistance 50K to 10M Resistance 50K to 10M RoHS compliant RoHS compliant Electrical Data All All parts parts arare e Pb-Pb-frfree ee and and ccomply omply with with EU EU DirDirectivective e 2011/65/EU 2011/65/EU amended amended bby y (EU) (EU) 2015/863 2015/863 (R(RoHS3)oHS3) LHVC0603 LHVC0805 LHVC1206 LHVC2010 LHVC2512 Power rating at 70C watts 0.1 0.125 0.25 0.5 1 Electrical Data Resistance range ohms 100K to 10M 50K to 10M LHVC0603 LHVC0805 LHVC1206 LHVC2010 LHVC2512 Limiting element voltage dc / ac pk volts 200 400 500 1600 2000 Power rating at 70C watts 0.1 0.125 0.25 0.5 1 5s Overload voltage dc / ac pk volts 400 800 1000 2500 3000 Resistance range ohms 100K to 10M 50K to 10M Dielectric withstand voltage dc / ac pk volts 300 500 Limiting element voltage dc / ac pk volts 200 400 500 1600 2000 TCR ppm/C 200 5s Overload voltage dc / ac pk volts 400 800 1000 2500 3000 Resistance tolerance % 1, 5 Dielectric withstand voltage dc / ac pk volts 300 500 Standard values 5%: E24, 1%: E96 TCR ppm/C 200 Ambient temperature range C -55 to +155 Resistance tolerance % 1, 5 Standard values 5%: E24, 1%: E96 Physical Data Ambient temperature range C -55 to +155 Dimensions (mm) and weight (mg) Physical Data Wt. Type L W T D1 D2 nom. Dimensions (mm) and weight (mg) LHVC0603 1.6 0.1 0.8 +0.15/-0.1 0.45 0.1 0.3 0.2 0.3 0.2 2.1 Wt. Type L W T D1 D2 LHVC0805 2 0.15 1.25 +0.15/-0.1 0.55 0.1 0.4 0.2 0.4 0.2 4.7 nom. 8.5 LHVC1206 3.1 0.15 1.55 +0.15/-0.1 0.55 0.1 0.45 0.2 0.45 0.2 LHVC0603 1.6 0.1 0.8 +0.15/-0.1 0.45 0.1 0.3 0.2 0.3 0.2 2.1 LHVC2010 5 0.1 2.5 +0.15/-0.1 0.55 0.1 0.6 0.25 0.5 0.3 25 LHVC0805 2 0.15 1.25 +0.15/-0.1 0.55 0.1 0.4 0.2 0.4 0.2 4.7 LHVC2512 6.35 +0.1 3.2 +0.15/-0.1 0.55 0.1 0.6 0.25 0.5 0.2 44 LHVC1206 3.1 0.15 1.55 +0.15/-0.1 0.55 0.1 0.45 0.2 0.45 0.2 8.5 LHVC2010 5 0.1 2.5 +0.15/-0.1 0.55 0.1 0.6 0.25 0.5 0.3 25 Construction 44 LHVC2512 6.35 +0.1 3.2 +0.15/-0.1 0.55 0.1 0.6 0.25 0.5 0.2 Pd/Ag terminations are applied to the top and bottom of an alumina substrate. A resistive element is printed between the top face conductors, which is then adjusted to value and protected. Construction A wraparound conductor is applied to join the top and bottom sides. The terminations are electroplated with a Ni barrier layer prior to plating with Pd/Ag terminations are applied to the top and bottom of an alumina substrate. A resistive element is printed between the top face conductors, a Sn nish. which is then adjusted to value and protected. A wraparound conductor is applied to join the top and bottom sides. The terminations are electroplated with a Ni barrier layer prior to plating with Marking a Sn nish. Where space allows, LHVC resistors are marked with value in three or four characters. The coding is two digits for E24 or three digits for E96 fol- lowed by one multiplier expressing the number of zeros. For E96 values on LHVC0603 standard EIA-96 codes are used, consisting of a 2 digit value Marking code and one letter multiplier code. Where space allows, LHVC resistors are marked with value in three or four characters. The coding is two digits for E24 or three digits for E96 fol- lowed by one multiplier expressing the number of zeros. For E96 values on LHVC0603 standard EIA-96 codes are used, consisting of a 2 digit value code and one letter multiplier code.Solvent Resistance The body protection and marking are resistant to all normal industrial solvents suitable for printed circuits. Solvent Resistance The body protection and marking are resistant to all normal industrial solvents suitable for printed circuits. General Note Welwyn Components reserves the right to make changes in product specication without notice or liability. A subsidiary of All information is subject to Welwyns own data and is considered accurate at time of going to print. General Note TT electronics plc General Note Welwyn Components reserves the right to make changes in product specication without notice or liability. BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. A subsidiary of Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK All information is subject to Welwyns own data and is considered accurate at time of going to print. TT electronics plc All information is subject to TT Electronics own data and is considered accurate at time of going to print. Telephone: +44 (0)1670 822181 Facsimile: +44 (0)1670 829465 Email: info welwyn-tt.com Website: www.welwyn-tt.com 07. 11 www.ttelectronics.com/resistors Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK TT Electronics plc Telephone: +44 (0)1670 822181 Facsimile: +44 (0)1670 829465 Email: info welwyn-tt.com Website: www.welwyn-tt.com 07. 11 06.18Lower Range High Lower Range High Voltage Chip Resistors Voltage Chip Resistors Welwyn Components LHVC Series LHVC Series Flammability The resistor will not burn or emit incandescent particles under any condition of applied temperature or overload. Solderability 95% min coverage (MIL-STD 202F / 208H, 235C 2 secs) Mounting (nominal dimensions in mm) Type A B C LHVC0603 0.7 0.7 1.0 A LHVC0805 1.0 0.8 1.50 C LHVC1206 2.0 1.0 1.75 LHVC2010 4.0 1.2 2.75 B LHVC2512 5.3 1.2 3.5 Performance Data Maximum Power de-rating graph Load at rated power R% 3 Proportion of Pr (1000hrs cyclic load at 70C) 100% De-rating from rated power at 70C See Graph Short term overload R% 2 (6.25 x rated power for 5s) Temperature rapid change R% 1% tolerance: 0.5, (-55 / +155C, 5 cycles) 5% tolerance: 1 0% T (C) Damp heat steady state R% 3 -55 70 155 Insulation resistance R% >1000M Packaging The standard packing for LHVC0603, 0805 and 1206 is in 8mm wide paper tape, for LHVC2010 is in 12mm wide paper or plastic tape and for LHVC2512 is in 12mm wide plastic tape. This is wound on a reel of 178mm diameter. Ordering Procedure Example: LHVC0805 at 100 kilohms and 1% tolerance on reel of 5000 pieces: L H V C 0 8 0 5 1 0 0 K F T 5 Type Value (use IEC62 code) Tolerance (use IEC62 code) F 1% J 5% Packing T5 0603 / 0805 / 1206 5,000 / reel T4 Standard T4 2010 / 2512 4,000 / reel General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics own data and is considered accurate at time of going to print. www.ttelectronics.com/resistors Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0)1670 822181 Facsimile: +44 (0)1670 829465 Email: info welwyn-tt.com Website: www.welwyn-tt.com 07. 11 TT Electronics plc 06.18