Resistors Metal Foil on Ceramic Chip Resistors MFC Series Small size 0603 Resistance range 5 to 20m Current sensing for power electronics High power density All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Data 0603 Power rating 70C W 0.5 Resistance range m 5 to 20 Standard values m 5, 7, 9, 10, 20 Tolerance % 1, 5 TCR (+25C to +125C) ppm/C 50 Operating temperature C -55 to +155 Physical Data Dimensions in mm and nominal weight in mg A T L W A T Wt. nom A L W A Wrap-around terminations 0603 1.60.2 0.80.2 0.40.2 0.60.2 3.3 (3 faces) Construction Recommended Pad Dimensions Metal foil resistor material, is bonded onto a 96% alumina substrate and protected. Wrap-around terminations have an electroplated nickel barrier L and solder coating. B Marking A Components are not marked. Reels are marked with type, value, tolerance, date code and quantity. Cu Trace Sensing Trace Solvent Resistance The body protection is resistant to all normal industrial cleaning solvents All dimensions in mm suitable for printed circuits. Size Resistance m A L B 5 & 20 0.6 0603 1.0 2.8 Others 0.85 For dissipation at rated power, copper trace thickness is 0.11mm General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics own data and is considered accurate at time of going to print. Metal Foil on Ceramic Chip Resistors Performance Data Parameter Maximum MFC Series Load at rated power: 1000 hours at 70C, cyclic load R% 1 Performance Data Overload: 5 x rated power for 5 seconds R% 1 Parameter Maximum Moisture: No load, 1000 hours 85C, 85% RH R% 1 Performance Data Load at rated power: 1000 hours at 70C, cyclic load R% 1 Temperature rapid change: 100 cycles, -55C & 155C R% 1 Overload: 5 x rated power for 5 seconds R% 1 High temperature exposure: 1000 hours at 155C R% 1 Parameter Maximum Moisture: No load, 1000 hours 85C, 85% RH R% 1 Low temperature exposure: 1000 hours at -55C R% 1 Load at rated power: 1000 hours at 70C, cyclic load R% 1 Temperature rapid change: 100 cycles, -55C & 155C R% 1 Bend stOvrengterload: 5 x rh: 2mm deatfed polectionw er for 5 seconds R% R% 0.5 1 High temperature exposure: 1000 hours at 155C R% 1 Moisture: No load, 1000 hours 85C, 85% RH R% 1 Resistance to solder heat: 2605C for 10s R% 0.5 Low temperature exposure: 1000 hours at -55C R% 1 R% Temperature rapid change: 100 cycles, -55C & 155C R% 1 Solderability: 2455C for 2s 95% coverage Bend strength: 2mm deflection R% 0.5 High temperature exposure: 1000 hours at 155C R% 1 Insulation resistance: 100V DC for 1min ohms >100M Resistance to solder heat: 2605C for 10s R% 0.5 Low temperature exposure: 1000 hours at -55C R% 1 R% Bend sSoldetrraengbilitth: 2mm dey: 2455C fflectionor 2s R% 95% coverag0.5e RInsulesistaatnicoen r toesi sostldaencr he:e a100t: V2 6DC0 fo5r C1m fionr 10s R% ohms 0.5 >100M De-rating Curve Solderability: 2455C for 2s 95% coverage Insulation resistance: 100V DC for 1min ohms >100M De-rating Curve Derating Curve Packaging 0603 size resistors are supplied on 8mm paper carrier tape, all on 7 inch reels as per IEC 286-3. The 0603 size has 5000 chips per reel. Packaging Packaging 0603 size resistors are supplied on 8mm paper carrier tape, all on 7 inch reels as per IEC 286-3. The 0603 size has 5000 chips per reel. 0603 size resistors are supplied on 8mm paper carrier tape, all on 7 inch reels as per IEC 286-3. The 0603 size has 5000 chips per reel. Ordering Procedure Ordering Procedure Example: MFC0603-R005FT5 (MFC0603, 5 milliohms 1%, Pb-free) Example: MFC0603-R005FT5 (MFC0603, 5 milliohms 1%, Pb-free) Ordering Procedure M F C 0 6 0 3 - R 0 0 5 F T 5 Example: MFC0603-R005FT5 (MFC0603, 5 milliohms 1%, Pb-free) 1 2 3 4 5 M F C 0 6 0 3 - R 0 0 5 F T 5 1 2 3 4 5 1 2 3 4 5 Series Size Value Tolerance Packing MFC 0603 F = 1% T5 0603 5000/reel 3/4 characters 1 2R = ohms 3 4 5 J = 5% Series Size Value Tolerance Packing MFC 0603 3/4 characters F = 1% T5 0603 5000/reel R = ohms J = 5% General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics own data and is considered accurate at time of going to print.