OPB750T TT Electronics

Reflective Object Sensor OPB750N, OPB750T OPB755NZ, OPB755TZ, OPB755TAZ Features: OPB750 High contrast ratio (1,000 :1 minimum) Low cost plastic housing Product Photo Here PCBoard mount (OPB750N, OPB750T) OPB755TAZ OPB755TZ 12 (305 mm) 26 AWG wires (OPB755NZ, OPB755TZ) Available with no-mounting tabs N package Available with two mounting tabs T package Description: Each sensor in the OPB750 and OPB755 series has a reflective assembly that features a Light Emitting Diode (LED) and phototransistor output designed to decrease low-level light, while not affecting the high-level light gain. The OPB750N and OPB750T devices have are designed for PCBoard mounting with 0.40 (10 mm) length leads. OPB755NZ, OPB755TZ and OPB755TAZ assemblies are designed for remote mounting. The OPB755NZ and OPB755TZ have 12 (305 mm) UL rated wire, 26 AWG wire leads that terminate into an AMP 3-640442-5 connector. The OPB755TAZ has 24 (610 mm) UL rated wire, 26 AWG leads. The OPB750T, OPB755TZ and OPB755TAZ have two mounting tabs while the OPB750N and OPB755NZ have no mounting tabs. Photologic output versions are available with the OPB760 and OPB770 series. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: Part LED Peak Reflection Distance Lead Non-contact reflective object Number Wavelength Sensor Inch Length Tabs sensor 0.080 (2.03 mm) Assembly line automation OPB750N 0.150 (3.81 mm) No tabs Machine automation 0.220 (5.59 mm) Transistor Machine safety 890 nm 0.40 & Rbe 0.080 (2.03 mm) End of travel sensor 0.150 (3.81 mm) OPB750T 2 Tabs 0.220 (5.59 mm) 0.080 (2.03 mm) OPB755NZ 0.150 (3.81 mm) No tabs 12 / 26 0.220 (5.59 mm) AWG Wire with 0.080 (2.03 mm) connector Transistor OPB755TZ 890 nm 0.150 (3.81 mm) & Rbe 0.220 (5.59 mm) 2 Tabs 24 / 26 0.080 (2.03 mm) AWG Wire OPB755TAZ 0.150 (3.81 mm) NO 0.220 (5.59 mm) connector OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.3 05/08 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com Page 1 of 4 Reflective Object Sensor OPB750N, OPB750T OPB755NZ, OPB755TZ, OPB755TAZ OPB750N OPB750T Reflective Surface 1 3 2 4 OPB750 Pin Description 1 Cathode 2 Anode 4 Collector 3 Emitter MILLIMETERS DIMENSIONS ARE IN: INCHES OPB755NZ OPB755TZ Reflective Surface OPB755TAZ 5 3 4 1 OPB755 Color Description Black-5 Cathode Red-4 Anode White-1 Collector Green-3 Emitter OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 05/08 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 4 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com