OPB911W55Z TT Electronics

Photologic Slotted Optical Switch Wide Gap Series OPB900 through OPB913 Series (L, W Z) L Series Features: 0.375 (9.5 mm) wide gap Choice of logical output configurations W Series Product Photo Here Choice of opaque or IR transmissive housing material Choice of PCBoard or 26 AWG, UL rated wire Data rates to 250 kBaud Description: The OPB900 - OPB913 series of Photologic Integrated Circuit Switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.375 (9.5mm) wide slot, a user can specify the type and polarity of the TTL output and the type of shell material. Electrical output can be specified as either TTL Totem Pole (buffered) or TTL Open Collector, either of which can be supplied with an inverted output polarity. All versions have the added stability of hysteresis built into the amplification circuitry. Applications: Part Number Guide OPB900 Series (L, W) Mechanical switch replacement OPB9 Speed indication (tachometer) 0 = Dust protection with apertures L55 = Solder lead termination (PCBoard mount) 1 = Open apertured Mechanical limit indication 0 = Totem Pole W5 Z= 26 AWG wire termination (24 61cm long) Edge sensing 1 = Open Collector Object sensing Aperture sizes: 2 = Inverted Totem Pole 1 = 0.010 (0.25 mm) 3 = Inverted Open Collector 5 = 0.050 (1.52 mm) Totem-PoleTotem P-oOutput le Output Open Collector OutputOpen-Collector-Output Inverted Totem-PoInverted Output Seriesle Inverted Open Collector OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.2 09/06 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 4 Photologic Slotted Optical Switch Wide Gap Series OPB900 through OPB913 Series (L, W Z) MILLIMETERS DIMENSIONS ARE IN: INCHES Color-Pin Description Color-Pin Description Color-Pin Description Color-Pin Description Color-Pin Description Red-1 Anode Black-2 Cathode White-3 V Blue-4 Output Green-5 Ground CC Absolute Maximum Ratings (T = -40 C to + 70 Unless otherwise noted) A Storage Temperature -40 C to +85 C Operating Temperature -40 C to +70 C (1) Lead Soldering Temperature (1/16 (1.6 mm) from case for 5 seconds with soldering iron) 260 C Input Infrared LED DC Forward Diode (LED) Current 40 mA DC Reverse Diode (LED) Voltage 2 V (1) Input Diode Power Dissipation 100 mW Output Photologic Supply Voltage, V (not to exceed 3 seconds) 10V CC Voltage at Output Lead (Open Collector Output version) 35 V (2) Output Photologic Power Dissipation 200 mW (3) Total Device Power Dissipation 300 mW Notes: (1) Derate linearly 2.22 mW/C above 25C (2) Derate linearly 4.44 mW/C above 25C (3) Derate linearly 6.66 mW/C above 25C (4) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (5) Methanol or isopropanol are recommended as cleaning agents. The plastic housing is soluble in chlorinated hydrocarbons and keytones. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 09/06 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 4 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com