OPF500 Series Features: Interfaces with all logic circuits Two output options Optimized for fiber optic applications using 50 to 200 micron fibers Data rate to 200kbps NRZ Available with multiple packaging options Description: The OPF500 series receiver contains a monolithic integrated circuit which incorporates a photodiode, linear amplifier, a voltage regulator, and a Schmitt trigger on a single silicon chip. These receivers are designed for short haul fiber optic systems using 850 nm LEDs such as Opteks OPF300 series. These devices feature TTL/LSTTL compatible logic level output. An internal voltage regulator allows operation with supply voltages ranging from 4.5V to 16V. Applications: Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Part Ordering Information Part Number Description OPF500 Buffer, 10kW Pull-Up Plastic Cap Component OPF505 Buffer, 10kW Pull-Up Metal Can Component OPF507 Buffer, 10kW Pull-Up Metal ST Receptacle This component is susceptible to damage from electrostatic discharge (ESD). Normal static precautions should be taken in handling and assembly of this component to prevent ESD damage or degradation. Ro HS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.optekinc.com www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 1 TT electronics plc OPF500 Series Mechanical OutlineOPF500 General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.optekinc.com www.ttelectronics.com considered accurate at time of going to print. Issue B 08/2016 Page 2 TT electronics plc