Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE Features: 6 kV dc electrical isolation Inexpensive plastic housing Choice of phototransistor or photodarlington output UL registered File No. E58730 Description: Each OPI7002 and OPI7010 consists of an infrared emitting diode coupled to a NPN silicon phototransistor. The LED and sensor are encased in a black, low-cost plastic housing. Pin spacing is compatible with standard dual -in-line packages. Each OPI7320RCE and OPI7340RCE consists of an infrared emitting diode coupled to a NPN silicon photodarlington. The LED and sensor are encased in a high dielectric plastic housing. Pin spacing is compatible with standard dual -in-line packages. The RCE versions reverses the Phototransistor Emitter and Collector pin -out. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: LED Isolation Lead CTR I (mA) V (Volts) F CE Requiring high voltage isolation between input and Part Peak Voltage Length / Min Typ / Max Max output Number Wavelength Sensor (,000) Spacing Electrical isolaoti n in dirty environments OPI7002 20 0.30 / 890 nm Transistor 6 10 / 50 30 Industrial equipment 0.30 OPI7010 100 Medical equipment OPI7320RCE 200 890 nm or 0.30 / Office equipment Darlington 6 5 / 50 15 935 nm 0.30 OPI7340RCE 400 OPI7002, OPI7010 OPI7002RCE, OPI7010RCE 2 3 2 3 Pin LED Pin Transistor/ RCE 2 Cathode 3 Collector / Emitter 1 Anode 4 Emitter / Collector 1 4 1 4 OPI7320RCE, OPI7340RCE 2 3 1 4 MILLIMETERS DIMENSIONS ARE IN: INCHES RoHS General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com www.optekinc.com considered accurate at time of going to print. Issue C 10/2017 Page 1 TT electronics plc Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Operating Temperature Range -40 C to +85 C Storage Temperature Range -40 C to +85 C (1)(4) Input-to-Output Isolation Voltage 6 kVDC (2) Lead Soldering Temperature 1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron 260 C Input Diode Forward DC Current 50 mA Peak Forward current (1 s pulse width, 300 pps) 3 A Reverse Voltage 2 V (3) Power Dissipation 100 mW Output Phototransistor Collector-Emitter Voltage OPI7002, OPI7010, OPI7002RCE, OPI7010RCE 30 V OPI7320RCE, OPI7340RCE 15 V Emitter -Collector Voltage 5.0 V (3) Power Dissipation 100 mW Notes: (1) Measured with input leads and output leads shorted. (2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when ofl w soldering. (3) Derate linearly 1.66 mW/ C above 25 C. (4) UL recognioti n is for 6kV dc for one minute General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com www.optekinc.com considered accurate at time of going to print. Issue C 10/2017 Page 2 TT electronics plc