PLCC4 Surface Mount LED OVSA1xBC2R8 Series High intensity with low power consumption PLCC4 packaged in 8 mm tape on 7 diameter reel Product Photo Here Compatible with automatic placement equipment Dimensions: 3.2 x 2.7 x 1.95 mm 120 viewing angle The OVSA1xBC2R8 series is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications Traffic lights Signal and symbol luminaire Mono-color indicators Backlighting (LCD, switches, displays, illuminated advertising) Interior automotive lighting (instrumentation clusters) Safety marker lights (steps, exit ways) Intensity Part Number Material Emitted Color Lens Color Typ. mcd AlInGaP Amber 1500 Water Clear OVSA1ABC2R8 InGaN Blue 550 Water Clear OVSA1BBC2R8 InGaN Green 1800 Water Clear OVSA1GBC2R8 AllnGaP Red 1600 Water Clear OVSA1SBC2R8 DIMENSIONS ARE IN INCHES AND MM 5a Moisture RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue D 02/2014 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com Page 1 of 7 PLCC4 Surface Mount LED OVSA1xBC2R8 Series o Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage Temperature Range -40 ~ +100 C Operating Temperature Range -40 ~ +100 C Reverse Voltage 5 V Blue, Green 30 mA Continuous Forward Current Red, Amber 70 mA Blue, Green 100 mA Peak Forward Current (Pulse width 10 msec, duty cycle 10%) Red, Amber 200 mA Blue, Green 130 mW Power Dissipation Red, Amber 210 mW Blue, Green 200 C/W 1. Thermal Resistance Junction to Solder 150 C/W Red, Amber Blue, Green Class 2 Electrostatic Discharge Classification (MIL-STD-883E) Red, Amber Moisture Sensitivity Level (IPC/JEDEC J-STD-020C) 5a / 24 hrs LED Junction Temperature 110 C Lead Soldering Temperature 250 C / 10 seconds Note: 2 1. Rth test condition: Mounted on PC board FR 4 (pad size 16 mm ) o Electrical Characteristics (T = 25 C unless otherwise noted) A PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS SYMBOL 355 550 ---- Blue I = 30 mA F 1400 1800 ---- Green I Luminous Intensity mcd V 1120 1600 ---- Red I = 50 mA F Amber 1120 1500 ---- Blue ---- 3.6 4.2 I = 30 mA F Green ---- 3.6 4.2 V Forward Voltage V F Red ---- 2.4 3.0 I = 50 mA F Amber ---- 2.4 3.0 Blue ---- ---- 10 ---- ---- 10 Green I Reverse Current A V = 5 V R R ---- ---- 10 Red Amber ---- ---- 10 Blue 460 470 480 I = 30 mA F Green 515 527 535 Dominant Wavelength nm D 618 624 630 I = 50 mA Red F 584 591 599 Amber I = 30 mA Blue & Green F 2H-H 50% Power Angle 120 deg I = 50 mA Red & Amber F OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 02/2014 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 7 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleVLED optekinc.com www.optekinc.com